International Code Council Standards are a series of standards for buildings, unifying certain aspects of their design and construction to promote compatibility and reliability. They are revised and re-released every 3 years to stay up to date. These are the standards that were released in the year 2000.
The 2009 International Building Code Package provides the requirements that are necessary to meet the standard for the the design and installation of building systems and safeguarding the public. The package embodies energy conservation, fire, fuel gas, plumbing, urban-wildland and zoning codes and commentaries. It includes: ICC IBC-2009, ICC IEBC-2009, ICC IECC 2009, ICC IFC- 2009, ICC IFGC-2009, ICC IMC-2009, ICC IPC-2009, ICC IPMC-2009, ICC IPSDC-2009, ICC IRC-2009, ICC IWUIC-2009, ICC IZC-2009 and ICC PC-2009
This document is the 2002 Accumulative Supplement to the 2000 editions of the lnternational Building Code ICC Electrical CodeTM, International Energy Consewation Code International Fire Code International Fuel Gas Code International Mechanical Code International Plumbing Code International Private Sewage Disposal Code lnternational Property Maintenance Code@ and International Residential CodeB. It contains changes submitted in the 2000 and 2001 Code Development Cycles which were approved by the memberships of Building Officials and Code Administrators International, Inc; the International Conference of Building Officials; and the Southern Building Code Congress International, at their annual meetings held in SeptemberlOctober 2000 (2000 cycle) and September/October2001 (2001 cycle). The International Zoning Code has not been changed from the 2000 Edition.
This code applies to all buildings except detached one- and two-family dwellings and townhouses up to three stories. The 2021 IBC contains many important changes such as: Puzzle rooms (escape rooms) are now defined and regulated as special amusement areas, requiring compliance with Section 411 and special means of egress requirements. For the purposes of determining the allowable number of control areas in a building, each portion separated by one or more fire walls is now considered as a separate building. In Group E occupancies, enhanced classroom acoustics in compliance with ICC A117.1 are to be provided in all classrooms having of volume of 20,000 cubic feet or less. The requirements for metal composite materials and systems (MCM) installed on the exterior walls of Types I, II, III and IV construction were simplified and sprinkler allowances were deleted The use of intermodal shipping containers as buildings is now specifically addressed through provisions intended to supplement existing applicable IBC requirements. Automatic sprinkler protection is now required in Group S-2 open parking garages where any fire area exceeds 48,000 square feet. The 2017 edition of ICC A117.1 was adopted. Parapets of a minimum height are now required for aggregate-surfaced roofs to prevent blow-off. Mixed occupancy buildings with assembly spaces are placed in Risk Category III when the total public assembly occupant load is greater than 2500 people. The 2021 IBC snow map is updated to match ASCE 7-16 snow maps by adding a reference to ASCE 7 snow tables in states with large case study areas. Secondary rain loads are updated to be consistent with ASCE 7. Special inspection requirements were added to address the anchorage and connection of mass timber structural elements. Installation of firestop, fire-resistant joint systems and perimeter fire barrier systems in residential-use buildings now requires special inspection in Group R fire areas having an occupant load exceeding 250 people. Frost protection for egress doors was added to the foundation requirements. ACI standards ACI 117 and ITG 7 were added by reference to provide acceptable tolerances for concrete construction. Three new types of construction (Types IV-A, IV-B, and IV-C) allow mass timber buildings of taller heights, more stories above grade, and greater allowable areas compared to existing provisions for heavy timber buildings.
The IECC addresses energy efficiency on several fronts including cost savings, reduced energy usage, conservation of natural resources and the impact of energy usage on the environment. For the most current adoptions details go to International Code Adoptions Key changes include: Log homes designed in accordance with the standard ICC 400, Standards on the Design and Construction of Log Structures, are exempt from the building thermal envelope requirements of the IECC. The maximum allowable fenestration U-factors in Table R402.1.2 (for the prescriptive compliance path) for climates zones 3 through 8 have been reduced from the values in the 2015 edition. The ICC/RESNET 380 standard has been included as one of standards that can be used for determining the air leakage rate of a building or dwelling unit. The Energy Rating Index compliance alternative index values have been increased slightly however, the method for determining an index is now required to be in accordance with standard ICC/RESNET 301. Revisions to interior and exterior lighting power budgets and better clarity for lighting controls. Clarity that regardless of design methodology, system commissioning is required. New limits on heated or cooled vestibules. Mechanical provisions reorganized based on equipment type rather than design methodology.
The 2021 IFC contains regulations to safeguard life and property from fires and explosion hazards. Topics include general precautions, emergency planning and preparedness, fire department access and water supplies, automatic sprinkler systems, fire alarm systems, special hazards, and the storage and use of hazardous materials. Key changes to the IFC include: Requirements for Additive Manufacturing (3-D Printing) equipment and operations for both non-industrial and industrial applications are now provided. Flame propagation performance of permanently installed artificial combustible vegetation is required to be verified when exceeding certain heights located on roofs or in close proximity to buildings. Provisions for emergency responder communication were revised to reflect the expansion of such systems beyond radios and the need for increased performance of such systems. Sprinkler requirements for the storage, manufacture and sale of upholstered furniture and mattresses were updated and clarified. Part of this update is a new exception for single-story self-storage facilities accessed directly from the exterior. An automatic sprinkler system is now required for open parking garages exceeding a certain fire area threshold. The requirements for energy storage system (ESS) were further refined to reflect the variety of new technologies and applications (in building and standalone) and the need for proper commissioning and decommissioning of such systems. A new chapter was added that provides clarification and specific requirements for the storage of distilled spirits and wines in barrels and casks. The provisions for construction fire safety were reorganized and expanded with an emphasis on the owner’s responsibilities. The new language requires a site safety plan and designation of a site safety director.
Addresses the design and installation of fuel gas systems and gas fired appliances through prescriptive and performance requirements. Key changes in the 2021 IFGC include: The termination of concealed condensate piping requires marking to indicate if it is the primary drain or the secondary drain. Press-connect joints are acceptable for high pressure (over 5 psig) applications indoors. Commercial cooking appliances are not allowed within dwelling units.
Establishes minimum regulations for mechanical systems using prescriptive and performance-related provisions. The IMC was developed with broad-based principles that make possible the use of new materials, methods and design. Important changes in the 2021 IMC include: Clothes dryer exhaust terminals required to be at least 3 feet from any opening into a building. Polyurethane spray-applied foam on the exterior of ducts in attics and crawl spaces required to meet specific smoke and flame index limits. Fire and smoke dampers must be provided with approved access for inspection and maintenance. Refrigerant tables updated to include new refrigerants. Addition of condensate termination identification markings and discharge restrictions. Approved factory-built combination intake/exhaust terminations permitted, relaxing separation requirement. 30% reduction in minimum mechanical ventilation for whole-house balanced ventilation systems. Continuous operation requirement for manicure and pedicure station exhaust systems. Grease duct horizontal cleanout required within 3 feet of a horizontal discharge fan.
The 2021 IPC provides minimum regulations for plumbing facilities and provides for the acceptance of new and innovative products, materials, and systems. In October 2019, the Code Council released an independent study comparing model plumbing codes. It found that over a 12-year period, counties using the IPC saved $38 billion in construction costs, emitted 1,000,000 fewer tons of carbon dioxide, saw an additional 166,000 jobs, and saved 880 million feet of pipe. On average, a single-family home could save up to $4,000 in labor, materials and overhead compared to that same home built to other codes. To learn more about the IPC’s impact on construction, the economy and the environment, read the full report at www.iccsafe.org/IPC. Important changes in the 2021 IPC include: Multiple-user toilet facilities to serve all genders are now permitted. Two new methods for relining/rehabilitation of existing sewers are added. Accommodations for mounted roof top solar panels over vent terminals is added. CSA B805/ICC 805 Rainwater Harvesting Systems is allowed as an alternative design method. Plumbing provisions from ICC A117.1-2017 Standard for Usable and Accessible Buildings and Facilities are now included.
The 2021 IPMC provides requirements for continued use and maintenance of building elements, site conditions, swimming pools, plumbing, mechanical, electrical and fire protection systems in existing residential and nonresidential structures. For the most current adoptions details go to International Code Adoptions
The 2021 IPSDC companion to the IPC includes provisions for design, installation, and inspection of private sewage disposal systems, and provides flexibility in the development of safe systems. For the most current adoptions details go to International Code Adoptions
This comprehensive code comprises all building, plumbing, mechanical, fuel gas and electrical requirements for one- and two-family dwellings and townhouses up to three stories. The 2021 IRC contains many important changes such as: Braced wall lines must be placed on a physical wall or placed between multiple walls. The rated separation for two-family dwellings is 1 hour whether or not a lot line exists between units. Emergency escape and rescue openings require a clear 36-inch-wide path to a public way. An engineered design is required for storm shelters. A habitable attic is limited to one-half the area of the story below and the dwelling requires sprinklers. Updated Wind Speed maps match IBC and ASCE 7 maps. Deck design now considers snow load, tributary area for footing and post height, and guard details. Specific requirements for deck guardrails were added. Component and cladding wind pressures in Table R301.2(2) are updated for new design wind speeds and hip or gable roof profiles. Minimum footing size tables are revised to more accurately reflect current practice. Cripple wall requirements apply only to exterior cripple walls. New appendices for cob construction and 3D printed construction are added. A 30 percent reduction of airflow is permitted for balanced ventilation systems. Commercial gas cooking appliances are prohibited. The head pressure for a water test of DWV systems increased to 10 feet. Air vacuum testing is now permitted for plastic piping DWV systems. Section P2904 for dwelling sprinklers is expanded to more closely align with NFPA 13D. An emergency service disconnect is required in a readily accessible outdoor location. A surge-protective device (SPD) is now required at the service panel. The number of receptacle outlets required for peninsular and island countertops in kitchens is determined by the area of the countertop surface. GFCI protection is now required for damp and wet locations not included in the other 10 areas requiring GFCI protection. The 2021 IRC Redline is still in development and you will received an updated PDF once completed.
The 2021 IZC promotes uniformity and consistency in zoning for city planners, code officials and developers. For the most current adoptions details go to International Code Adoptions
Presents regulations based on outcome rather than prescription. It encourages new design methods by allowing a broader parameter for meeting the intent of the International Codes.