Most recent

ISO 12795:2004

Nuclear fuel technology - Uranium dioxide powder and pellets - Determination of uranium and oxygen/uranium ratio by gravimetric method with impurity correction


ISO 12795:2004 specifies a method of determining the mass fraction of uranium and the oxygen-to-uranium atomic ratio in hyperstoichiometric uranium dioxide (UO2+X) powders and pellets.

ISO 12795:2004 is used for the determination of the U mass fraction and the O/U-ratio of nuclear grade uranium dioxide.

An impurity correction in the U mass fraction and the O/U-ratio determination should be performed, if the amount of total impurities in oxide form exceeds 1 500 micrograms per gram of sample. Lower impurity levels influence the O/U-ratio by less than 0,000 5 and can be neglected. The non-volatile impurities shall be determined by an appropriate technique, and the correction applied. If the total content of the non-volatile impurities in oxide form is greater than 1 500 micrograms per gram of sample, the overall precision of the method depends on the accuracy of these impurity measurements.


CONTENT PROVIDER
International Organization for Standardization [iso]

Others Also Bought
Nuclear energy - Uranium dioxide powder and sintered pellets - Determination of oxygen/uranium atomic ratio by ...
Uranium metal and uranium dioxide powder and pellets -- Determination of nitrogen content -- Method using ammonia-sensing ...
Nuclear energy -- Chemical separation and purification of uranium and plutonium in nitric acid solutions for isotopic ...
Document History
We have no document history for this standard.
Included in Packages
This standard is not included in any packages.
Amendments & Corrections
We have no amendments or corrections for this standard.