NFPA: National Fire Protection Association

NFPA, the National Fire Protection Association, is a global nonprofit organization established in 1896. The NFPA’s mission is to reduce the worldwide burden of fire and other hazards on the quality of life by providing and advocating scientifically-based consensus codes and standards, research, training and education. The leader in providing fire, electrical, and life safety standards, NFPA membership totals more than 75,000 individuals from around the world and more than 80 national trade and professional organizations. NFPA’s 300 codes and standards are designed to minimize the risk and effects of fire by establishing criteria for building, processing, design, service, and installation around the world. Standards from NFPA-Fire are available as part of a Standards Subscription. If you or your organization are interested in easy, managed, online access to standards, a Standards Subscription may be what you need - please contact us at: [email protected] or 1-212-642-4980 or Request Proposal Price.

Below are NFPA-Fire's best-selling standards. To find additional standards, please use the search bar above.

NFPA 70E-2018

NFPA 70E Standard for Electrical Safety in the Workplace®, 2018 edition

Keep the workplace safe from electrical hazards using the 2018 edition of NFPA 70E®.  In a fraction of a second, an electrical incident can claim lives and cause permanently disabling injuries. In fact, hundreds of deaths and thousands of burn injuries occur each year due to shock, electrocution, arc flash, and arc blast -- and most could be prevented through compliance with NFPA 70E: Standard for Electrical Safety in the Workplace®.  Originally developed at OSHA's request, NFPA 70E responds to the latest information about the effects of arc flash, arc blast, and direct current (dc) hazards, and recent developments in electrical design and Personal Protective Equipment (PPE). It provides vital information that helps you comply with OSHA 1910 Subpart S and OSHA 1926 Subpart K.  Make sure everyone goes home at night. New NFPA 70E explicitly states that the first priority must be the elimination of the hazard.  The Standard continues to evolve to address risk assessment and introduces human factors, such as human error, as part of that assessment. Annex Q, Human Performance and Workplace Electrical Safety, is included to provide guidance. NFPA 70E emphasizes the need to use the hierarchy of risk controls, by moving it from an informational note into the text of the Standard. NFPA 70E now explicitly states that the first priority must be the elimination of the hazard.  Other changes in this edition:  A modified arc flash hazard identification table [Table 130.7(C)(15)(A)(a)] makes it easier to determine the likelihood that an arc flash could occur. Reorganized Article 120 presents the requirements for establishing an electrically safe work condition in a logical order of application of the program. Changes to Article 320 introduce voltage thresholds of 100 Vdc specifically for batteries and battery rooms to cover the unique situations in these locations. Extensively revised, Article 330 on lasers now focuses on safety-related maintenance issues rather than issues associated with laser use. Article 350 introduces an Electrical Safety Authority as a possible authority having jurisdiction for laboratories. Bring your company's electrical safety program up-to-date and give employees critical knowledge.  If you're responsible for ensuring workers are protected from shock and arc flash hazards, use the 2018 edition of NFPA 70E along with NFPA 70®: National Electrical Code® (NEC®) and NFPA 70B: Electrical Equipment Maintenance. Together, the "Big Three" help you protect your personnel and your company from tragic loss. NFPA 70E is a vital tool for contractors, risk managers, engineers, building managers, owners, and everyone concerned with ending electrical-related accidents, liability, and loss. (Softbound, 104 pp., 2018)

NFPA 101-2018

NFPA 101 Life Safety Code, 2018 edition

Major changes and an expanded scope make the 2018 edition of NFPA 101: Life Safety Code essential in any occupancy -- from assembly to health care, industrial, and residential.

As the built environment and risks evolve, so do the challenges to protect people from fire and related hazards. NFPA's Life Safety Code is the most widely used source for strategies for occupant safety throughout the life of a building. Vital for architects, engineers, building owners and building managers, hospital administrators, and AHJs, NFPA 101 covers it all: Egress, sprinklers, alarms, emergency lighting, smoke barriers, special hazard protection, and much more.

For the 2018 edition, the scope of NFPA 101 is expanded to include hazardous materials emergencies, injuries from falls, and emergency communications.

The Code provides a flexible approach that adapts to nontraditional use of buildings; innovative designs; and new technologies, materials, and construction practices. It addresses life safety in both new and existing structures. Significant changes for the 2018 edition include:


New requirements for hazardous materials protection of other than fire-related hazards (Chapter 8)

A new reference to NFPA 4 for integrated fire protection and life safety system testing, and new provisions for risk analyses for mass notification systems (Chapter 9)

Animal housing facilities added as special structures (Chapter 11)

Added requirements for carbon-monoxide detection in new assembly occupancies and new residential board and care occupancies (Chapters 12 and 32)

Added criteria for door locking to prevent unwanted entry in educational, day care, and business occupancies (Chapters 14-17, 38, and 39)

A mandatory sprinkler requirement for all but very small new educational occupancies (Chapter 14)

New provisions that permit health care and ambulatory health care smoke compartments up to 40,000 ft2 (3720 m2) in area (Chapters 18 and 19)

Added requirements for bathtub and shower grab bars, which are then referenced by numerous occupancy chapters (Chapter 24)

Added requirements for attic protection requirements that impact certain new hotels and dormitories and apartment buildings (Chapters 28 and 30)

A new reference to NFPA 99 for medical gases in business occupancies (Chapters 38 and 39)

A new Annex C that offers guidance on several NFPA hazardous materials standards to assist users with the new hazardous materials protection requirements

NFPA 79-2018

NFPA 79 Electrical Standard for Industrial Machinery, 2018 edition

NFPA 79 provides safeguards for industrial machinery to protect operators, equipment, facilities, and work-in-progress from fire and electrical hazards.

NFPA 70-2017

NFPA 70 National Electrical Code, 2017 edition

This article contains only those definitions essential to the application of this Code. It is not intended to include commonly defined general terms or commonly defined technical terms from related codes and standards. In general, only those terms that are used in two or more articles are defined in Article 100. Other definitions are included in the article in which they are used but may be referenced in Article 100. Part I of this article contains definitions intended to apply wherever the terms are used throughout this Code. Part II contains definitions applicable to installations and equipment operating at over 1000 volts, nominal.

NFPA 2-2020

NFPA 2 Hydrogen Technologies Code, 2020 edition

The purpose of this code shall be to provide fundamental safeguards for the generation, installation, storage, piping, use, and handling of hydrogen in compressed gas (GH2) form or cryogenic liquid (LH2) form.

NFPA 99-2018

NFPA 99 Health Care Facilities Code, 2018 edition

The 2018 edition of NFPA 99: Health Care Facilities Code makes performance criteria more usable, enforceable, and adoptable.  A must-have resource for everyone involved in health care safety, NFPA 99: Health Care Facilities Code provides performance criteria for health care facilities that follow a risk-based approach, where it is the risk posed to patients and staff, not the type of building, that defines safety guidelines. Provisions govern installation, inspection, testing, maintenance, performance, and safe practices for facilities, material, equipment, and appliances -- including medical gas and vacuum systems.  Major changes in the 2018 edition broaden the Code's scope and help you work more efficiently to ensure health care safety:  Requirements addressing the risk assessment in Chapter 4 have been revised to clarify the responsibility for conducting a risk assessment and determining risk categories. Chapter 5 includes requirements that now allow for the use of oxygen concentrators as central supply sources for piped medical gas systems. Corrugated medical tubing is now a permitted material for medical gas and vacuum systems. Chapter 6 is completely reorganized to group related requirements, allowing for the deletion of duplicated requirements for different types of EES. Chapter 7 now includes requirements for wireless phone and paging integration as well as for clinical information systems. Chapter 14 compiles all of the requirements for inspection, testing, and maintenance for hyperbaric facilities into one section. A new Chapter 15, Dental Gas and Vacuum Piping Systems is dedicated to the application of piped gas and vacuum systems for these systems that do not always readily fall under the requirements for medical gas and vacuum as addressed in Chapter 5. Requirements for fire extinguisher selection are included in Chapter 16 for spaces unique to health care facilities. Keep health care facilities up-to-code and patients and staff safe.  Update now. NFPA 99 users include contractors, engineers, facility managers, AHJs, plumbers, gas and vacuum system installers, security personnel, insurance companies, and manufacturers. (Softbound, 207 pp., 2018)

NFPA 30-2018

NFPA 30 Flammable and Combustible Liquids Code, 2018 edition

Apply the 2018 edition of NFPA 30 for better protection around flammable and combustible liquids.  Enforceable under OSHA and many state and local regulations, NFPA 30: Flammable and Combustible Liquids Code is the best practice widely used in industry and by insurers. The 2018 edition of the Code includes the latest and most complete criteria you need to protect your facility by ensuring safe storage, handling, and use of flammable and combustible liquids.  Significant revisions give Code users a clearer source of support. The 2018 edition of NFPA 30 presents:  Added definitions that reflect terms used in today's field Revisions recognizing nonmetallic intermediate bulk containers that can satisfy the fire exposure test protocols of Paragraph 9.4.1.1 New specific references in Subsection 9.4 to UL 2368, Standard for Fire Exposure Testing of Intermediate Bulk Containers for Flammable and Combustible Liquids; FM Class 6020, Approval Standard for Intermediate Bulk Containers; UL 1275, Standard for Flammable Liquid Storage Cabinets; and FM Class 6050, Approval Standard for Storage Cabinets (Flammable and Combustible Liquids Completely revised requirements for General Purpose Warehouses to only allow specific liquid/container combinations to be stored in such facilities New alternative means to calculate the water demand for the most hydraulically remote in-rack sprinklers in both Scheme "A", "B", and "C" designs A new requirement that nonmetallic cooking oil tanks be listed in accordance with UL 2152, Outline of Investigation for Special Purpose Nonmetallic Containers and Tanks for Specific Combustible or Noncombustible Liquids Numerous other changes that clarify the Code's intent and reduce conflicts or confusion Get the criteria you need to design your facilities to comply with sprinkler requirements and use safe operating practices.  Update to the 2018 edition of NFPA 30 now. (Softbound, Approx. 154 pp., 2018)

NFPA 55-2020

NFPA 55 Compressed Gases and Cryogenic Fluids Code, 2020 edition

This code shall apply to the installation, storage, use, and handling of compressed gases and cryogenic ?fluids in portable and stationary cylinders, containers, equipment, and tanks in all occupancies.

NFPA 10-2018

NFPA 10 Standard for Portable Fire Extinguishers, 2018 edition

Select, use, and maintain portable fire extinguishers that are appropriate to the hazard. Apply the 2018 edition of NFPA 10: Standard for Portable Fire Extinguishers.  Portable fire extinguishers are a critical first line of defense against small fires. For the best protection, be sure to select, use, and maintain extinguishers using the latest requirements as presented in the most up-to-date edition of NFPA 10: Standard for Portable Fire Extinguishers.  The 2018 edition includes clarified provisions for:  Electronic monitoring Obsolete extinguishers Extinguishers installed in areas containing oxidizers Extinguisher signs Extinguisher mounting equipment and cabinets Other recent changes expand the Standard's scope:  A new requirement addresses maintenance of hose stations that are used in lieu of extinguishers. The fire classification marking system is expanded to include markings for extinguishers rated for Class AC and Class AK, while removing information on obsolete equipment.  Guard against small fires with new NFPA 10, your all-in-one resource for portable fire extinguisher.  Whether you're a servicer, facility manager or owner, or technician, you can depend on this important Standard for current, comprehensive rules for the distribution, placement, maintenance, operation, and inspection of equipment -- as well as testing and recharging.

NFPA 69-2019

NFPA 69 Standard on Explosion Prevention Systems, 2019 edition

This standard shall cover the minimum requirements for installing systems for the prevention of explosions in enclosures that contain flammable concentrations of flammable gases, vapors, mists, dusts, or hybrid mixtures. This standard shall provide basic information for design engineers, operating personnel, and authorities having jurisdiction.