Customer Service:
Mon - Fri: 8:30 am - 6 pm EST

IMC International Mechanical Code

International Code Council Standards are a series of standards for buildings, unifying certain aspects of their design and construction to promote compatibility and reliability. They are revised and re-released every 3 years to stay up to date. These are the codes found in the International Mechanical Code.

ICC IMC-2021

2021 International Mechanical Code

Establishes minimum regulations for mechanical systems using prescriptive and performance-related provisions. The IMC was developed with broad-based principles that make possible the use of new materials, methods and design. Important changes in the 2021 IMC include: Clothes dryer exhaust terminals required to be at least 3 feet from any opening into a building. Polyurethane spray-applied foam on the exterior of ducts in attics and crawl spaces required to meet specific smoke and flame index limits. Fire and smoke dampers must be provided with approved access for inspection and maintenance. Refrigerant tables updated to include new refrigerants. Addition of condensate termination identification markings and discharge restrictions. Approved factory-built combination intake/exhaust terminations permitted, relaxing separation requirement. 30% reduction in minimum mechanical ventilation for whole-house balanced ventilation systems. Continuous operation requirement for manicure and pedicure station exhaust systems. Grease duct horizontal cleanout required within 3 feet of a horizontal discharge fan.

Available in Packages Available for Subscriptions

ICC IMC-2021

2021 International Mechanical Code

Establishes minimum regulations for mechanical systems using prescriptive and performance-related provisions. The IMC was developed with broad-based principles that make possible the use of new materials, methods and design. Important changes in the 2021 IMC include: Clothes dryer exhaust terminals required to be at least 3 feet from any opening into a building. Polyurethane spray-applied foam on the exterior of ducts in attics and crawl spaces required to meet specific smoke and flame index limits. Fire and smoke dampers must be provided with approved access for inspection and maintenance. Refrigerant tables updated to include new refrigerants. Addition of condensate termination identification markings and discharge restrictions. Approved factory-built combination intake/exhaust terminations permitted, relaxing separation requirement. 30% reduction in minimum mechanical ventilation for whole-house balanced ventilation systems. Continuous operation requirement for manicure and pedicure station exhaust systems. Grease duct horizontal cleanout required within 3 feet of a horizontal discharge fan.

Available in Packages Available for Subscriptions

ICC IMC-2018 Code/Commentary

International Mechanical Code, 2018 - Code and Commentary

Available for Subscriptions

ICC IMC-2021

2021 International Mechanical Code

Establishes minimum regulations for mechanical systems using prescriptive and performance-related provisions. The IMC was developed with broad-based principles that make possible the use of new materials, methods and design. Important changes in the 2021 IMC include: Clothes dryer exhaust terminals required to be at least 3 feet from any opening into a building. Polyurethane spray-applied foam on the exterior of ducts in attics and crawl spaces required to meet specific smoke and flame index limits. Fire and smoke dampers must be provided with approved access for inspection and maintenance. Refrigerant tables updated to include new refrigerants. Addition of condensate termination identification markings and discharge restrictions. Approved factory-built combination intake/exhaust terminations permitted, relaxing separation requirement. 30% reduction in minimum mechanical ventilation for whole-house balanced ventilation systems. Continuous operation requirement for manicure and pedicure station exhaust systems. Grease duct horizontal cleanout required within 3 feet of a horizontal discharge fan.

Available in Packages Available for Subscriptions

ICC IMC-2021

2021 International Mechanical Code

Establishes minimum regulations for mechanical systems using prescriptive and performance-related provisions. The IMC was developed with broad-based principles that make possible the use of new materials, methods and design. Important changes in the 2021 IMC include: Clothes dryer exhaust terminals required to be at least 3 feet from any opening into a building. Polyurethane spray-applied foam on the exterior of ducts in attics and crawl spaces required to meet specific smoke and flame index limits. Fire and smoke dampers must be provided with approved access for inspection and maintenance. Refrigerant tables updated to include new refrigerants. Addition of condensate termination identification markings and discharge restrictions. Approved factory-built combination intake/exhaust terminations permitted, relaxing separation requirement. 30% reduction in minimum mechanical ventilation for whole-house balanced ventilation systems. Continuous operation requirement for manicure and pedicure station exhaust systems. Grease duct horizontal cleanout required within 3 feet of a horizontal discharge fan.

Available in Packages Available for Subscriptions

ICC IMC-2021

2021 International Mechanical Code

Establishes minimum regulations for mechanical systems using prescriptive and performance-related provisions. The IMC was developed with broad-based principles that make possible the use of new materials, methods and design. Important changes in the 2021 IMC include: Clothes dryer exhaust terminals required to be at least 3 feet from any opening into a building. Polyurethane spray-applied foam on the exterior of ducts in attics and crawl spaces required to meet specific smoke and flame index limits. Fire and smoke dampers must be provided with approved access for inspection and maintenance. Refrigerant tables updated to include new refrigerants. Addition of condensate termination identification markings and discharge restrictions. Approved factory-built combination intake/exhaust terminations permitted, relaxing separation requirement. 30% reduction in minimum mechanical ventilation for whole-house balanced ventilation systems. Continuous operation requirement for manicure and pedicure station exhaust systems. Grease duct horizontal cleanout required within 3 feet of a horizontal discharge fan.

Available in Packages Available for Subscriptions

ICC IMC-2018 Code/Commentary

International Mechanical Code, 2018 - Code and Commentary

Available for Subscriptions

ICC IMC-2021

2021 International Mechanical Code

Establishes minimum regulations for mechanical systems using prescriptive and performance-related provisions. The IMC was developed with broad-based principles that make possible the use of new materials, methods and design. Important changes in the 2021 IMC include: Clothes dryer exhaust terminals required to be at least 3 feet from any opening into a building. Polyurethane spray-applied foam on the exterior of ducts in attics and crawl spaces required to meet specific smoke and flame index limits. Fire and smoke dampers must be provided with approved access for inspection and maintenance. Refrigerant tables updated to include new refrigerants. Addition of condensate termination identification markings and discharge restrictions. Approved factory-built combination intake/exhaust terminations permitted, relaxing separation requirement. 30% reduction in minimum mechanical ventilation for whole-house balanced ventilation systems. Continuous operation requirement for manicure and pedicure station exhaust systems. Grease duct horizontal cleanout required within 3 feet of a horizontal discharge fan.

Available in Packages Available for Subscriptions

ICC IMC-2003 Commentary

International Mechanical Code, 2003 - Commentary

The principal purpose of this Commentary is to provide a basic volume of knowledge and facts relating to the code. The Commentary provides it in a small package and at reasonable cost thorough coverage of many issues likely to be dealt with when using the International Mechanical Code-and then supplements that coverage with historical and technical background. Reference lists, information sources and bibliographies are also included.

Available in Packages Available for Subscriptions

ICC IMC-2021

2021 International Mechanical Code

Establishes minimum regulations for mechanical systems using prescriptive and performance-related provisions. The IMC was developed with broad-based principles that make possible the use of new materials, methods and design. Important changes in the 2021 IMC include: Clothes dryer exhaust terminals required to be at least 3 feet from any opening into a building. Polyurethane spray-applied foam on the exterior of ducts in attics and crawl spaces required to meet specific smoke and flame index limits. Fire and smoke dampers must be provided with approved access for inspection and maintenance. Refrigerant tables updated to include new refrigerants. Addition of condensate termination identification markings and discharge restrictions. Approved factory-built combination intake/exhaust terminations permitted, relaxing separation requirement. 30% reduction in minimum mechanical ventilation for whole-house balanced ventilation systems. Continuous operation requirement for manicure and pedicure station exhaust systems. Grease duct horizontal cleanout required within 3 feet of a horizontal discharge fan.

Available in Packages Available for Subscriptions
ANSI Logo

As the voice of the U.S. standards and conformity assessment system, the American National Standards Institute (ANSI) empowers its members and constituents to strengthen the U.S. marketplace position in the global economy while helping to assure the safety and health of consumers and the protection of the environment.

Useful Links
CUSTOMER SERVICE
NEW YORK OFFICE
ANSI HEADQUARTERS
2024 © American National Standards Institute (ANSI) All Rights Reserved.