Electronic Components Packages
US and international standards for electronic components, capacitors, transducers, surge protectors, LEDs, and resistors find wide application in consumer products, vehicles, medical devices, sensors and controls for industrial use and more. A representative selection of nearly one hundred standards published in recent years covering electronic components are provided here. For even more electronic component standards search by keyword in the field above or browse the offerings of the International Electrotechnical Commission (IEC) and the Institute of Electrical and Electronics Engineers (IEEE), two standard developing organizations focused on electronics and their design, manufacture, testing, use, and end-of-life procedures. These packages include many standards related to wireless electronics and electronic components.
BS 9000 Electronic Components Package
BS 9000 Electronic Components Package (Assessed Quality System) (British Standard)
The BS 9000 Electronic Components Assessed Quality System Package specifies the general procedures for the BS 9000 system for the specification, qualification or capability approval, inspection and release of electronic components of assessed quality. The specifications in this package are applicable to lot formation, release procedures, certified test records, approval procedures and conformance testing. The system for the assessed quality of electronic components is based on the national implementation of the CENELEC Electronic Components Committee (System for Europe) and IECQ system. Note: BS 9000-1:1989, BS 9000-5:1989, BS 9000-6:1989 and BS 9000-7:1989 are Historical Documents.
IEEE C63.4 and IEEE C63.10 Wireless Devices and Radio Noise Emissions Package
IEEE C63.4 and IEEE C63.10 Wireless Devices and Radio Noise Emissions Package
IEEE C63.4 and IEEE C63.10 Wireless Devices and Radio Noise Emissions Package provides the procedures for testing wireless devices such as remote control and security unlicensed wireless devices, frequency hopping and direct sequence spread spectrum devices, anti-pilferage devices, cordless telephones, medical unlicensed wireless devices, intrusion detectors, unlicensed wireless devices operating on frequencies below 30 MHz and automatic vehicle identification systems. It also provides the methods for measuring radio frequency signals and noise emissions from low voltage electrical and electronic equipment. The IEEE C63.4 and IEEE C63.10 Wireless Devices and Radio Noise Emissions Package provides the means to test the electronic device and measure the radio frequency of devices that are 9 kHz to 40 GHz. This package includes IEEE/ANSI C63.4-2014 and IEEE C63.10-2013.
N/A
IEC 62271-SER Ed. 1.0 b:2022
High-voltage switchgear and controlgear - ALL PARTS
A 15% discount of the total catalogue price is included.
This pack contains the following:
IEC 62271-1:2017+AMD1:2021 CSV
IEC 62271-3:2015
IEC 62271-4:2022
IEC/IEEE 62271-37-013:2021
IEC/IEEE 62271-37-082:2012
IEC 62271-100:2021
IEC 62271-100:2021/Cor.1:2021
IEC 62271-100:2021/Cor.2:2022
IEC 62271-101:2021
IEC 62271-102:2018+AMD1:2022 CSV
IEC 62271-103:2021
IEC 62271-104:2020
IEC 62271-105:2021 RLV
IEC 62271-106:2021
IEC 62271-107:2019 RLV
IEC 62271-108:2020
IEC 62271-109:2019 RLV
IEC 62271-110:2017 RLV
IEC 62271-111:2019
IEC 62271-112:2021 RLV
IEC 62271-200:2021
IEC 62271-201:2014
IEC 62271-202:2022
IEC 62271-203:2022 CMV
IEC 62271-204:2022 RLV
IEC 62271-205:2008
IEC 62271-207:2012
IEC TR 62271-208:2009
IEC 62271-209:2019+AMD1:2022 CSV
IEC 62271-209:2019 RLV
IEC TS 62271-210:2013
IEC 62271-211:2014
IEC 62271-212:2022 RLV
IEC 62271-213:2021
IEC 62271-214:2019
IEC 62271-215:2021
IEC TR 62271-300:2006
IEC TR 62271-301:2009
IEC TR 62271-302:2010
IEC TS 62271-304:2019
IEC TR 62271-305:2009
IEC TR 62271-306:2012+AMD1:2018 CSV
IEC TR 62271-307:2015
IEC TR 62271-310:2008
IEC TR 62271-312:2021
IEC 60529 / IEC 60068-2-1 / IEC 60068-2-14 / IEC 60068-2-31 / IEC 60068-2-78 - Degrees of Protection Package
IEC 60529, IEC 60068-2-1, IEC 60068-2-14, IEC 60068-2-31, and IEC 60068-2-78
The IEC 60529 / IEC 60068-2-1 / IEC 60068-2-14 / IEC 60068-2-31 / IEC 60068-2-78 - Degrees of Protection Package provides various testing and classifications of degrees of protection for your equipment. Testing methods for equipment included in the IEC 60529 / IEC 60068-2-1 / IEC 60068-2-14 / IEC 60068-2-31 / IEC 60068-2-78 - Degrees of Protection Package are cold testing, rapid temperature changes, high humidity and rough handling. IEC 60529 / IEC 60068-2-1 / IEC 60068-2-14 / IEC 60068-2-31 / IEC 60068-2-78 - Degrees of Protection Package contains: IEC 60529 Ed. 2.2 b:2013 IEC 60529 Ed. 2.2 b cor.1:2013 IEC 60529 Ed. 2.2 b cor.2:2015 IEC 60068-2-1 Ed. 6.0 b:2007 IEC 60068-2-14 Ed. 7.0 b:2023 IEC 60068-2-31 Ed. 2.0 b:2008 IEC 60068-2-78 Ed. 2.0 b:2012
ANSI C12. Smart Grid Meter Package
ANSI C12. Smart Grid Meter Package
The ANSI C12. Smart Grid Meter Package provides the requirements and guidance on electricity metering, watt hour meter sockets, device data tables, meter interfacing to data communication networks and type 2 optical ports. ANSI C12. Meter package also establishes performance criteria for thermal demand meters, mechanical demand registers and phase shifting devices used in metering. Test methods for transformer-rated meters and self contained "A" base watt hour meter are included in this package as well as a watt hour safety standard. This package contains all parts of NEMA ANSI C12. ANSI C12.1-2022 NEMA ANSI C12.4:1984 (R2011) ANSI C12.5-1978 (R2012) ANSI C12.6-1987 (R2016) ANSI C12.7-2022 ANSI C12.8-1981 (R2021) ANSI C12.9-2014 (R2021) ANSI C12.10:2011 (R2021) ANSI C12.11:2006 (R2019) ANSI C12.18:2006 (R2023) ANSI C12.20-2015 (Historical Document) ANSI C12.21:2006 (R2023) ANSI C12.19-2021 ANSI C12.22-2012 (R2020) NEMA C12.24 TR-2022
