ANSI/ASSP A10.48-2023

Criteria for Safety Practices with the Construction, Demolition, Modification and Maintenance of Communication Structures

This standard establishes minimum criteria for safe work practices and training for personnel performing work on communication structures including antenna and antenna supporting structures, broadcast and other similar structures supporting communication related equipment.

ANSI/ASSE A10.4-2016

Safety Requirements for Personnel Hoists and Employee Elevators on Construction and Demolition Sites

This standard applies to the design, construction, installation, operation, inspection, testing, maintenance, alterations and repair of hoists and elevators that 1) are not an integral part of buildings, 2) are installed inside or outside buildings or structures during construction, alteration, demolition or operations and 3) are used to raise and lower workers and other personnel connected with or related to the structure. These personnel hoists and employee elevators may also be used for transporting materials under specific circumstances defined in this standard.

ANSI/ASSP A10.50-2024

Standard for Heat Stress Management In Construction and Demolition Operations

This standard establishes the minimum requirements for the prevention of heat illnesses and management of heat stress hazards and exposures encountered during construction and demolition operations. It establishes procedures for the management of heat stress hazards and the selection and use of appropriate controls and practices to reduce risks presented by heat stress and prevention of heat illnesses for all work environments

ANSI/ASSP A10.32-2023

Personal Fall Protection Systems Used in Construction and Demolition Operations

This standard establishes safety requirements and performance criteria for active fall protection systems and their associated equipment used in construction and demolition. This includes guidelines for the planning, configuration, selection, installation, user training, operation, inspection and maintenance of equipment that is utilized in active fall protection systems. These systems create a personal interface with the worker via fitted equipment worn on the body while performing construction and demolition tasks at heights. 

ANSI/ASSP A10.11-2025

Safety Requirements for Personnel Nets

This standard establishes safety requirements for the selection, installation, and use of personnel nets during construction, repair, and demolition operations.

ANSI/ASSE A10.6-2006 (R2016)

Safety and Health Program Requirements for Demolition Operations

This standard applies to the demolition of buildings and other structures.

ANSI/ASSP A10.32-2023

Personal Fall Protection Systems Used in Construction and Demolition Operations

This standard establishes safety requirements and performance criteria for active fall protection systems and their associated equipment used in construction and demolition. This includes guidelines for the planning, configuration, selection, installation, user training, operation, inspection and maintenance of equipment that is utilized in active fall protection systems. These systems create a personal interface with the worker via fitted equipment worn on the body while performing construction and demolition tasks at heights. 

ANSI B11.10-2003 (R2020)

Safety Requirements for Metal Sawing Machines

This standard specifies safety requirements for the design, construction, modification, operation and maintenance (including installation, dismantling and transport) of a general class of stationary machine tools that use a saw blade (tool) to cut off or change the shape of the workpiece. This standard also applies to ancillary devices integrated into the machine (e.g., part handling mechanisms, chip handling systems). Excluded from the requirements of this standard are: woodworking/sawing machines; stonecutting sawing machines; food-processing sawing machines; abrasive-sawing machines; and portable by-hand sawing machines.

ISO 20474-1:2017

Earth-moving machinery - Safety - Part 1: General requirements

ISO 20474-1:2017 specifies the general safety requirements for earth-moving machinery as defined in ISO 6165, each of these requirements being common to two or more earth-moving machine families. It is also applicable to machine attachments, and to derivative machinery designed primarily for equipment used to excavate, load, transport, drill, spread, compact or trench earth, rock, and other materials.

It is intended to be used in conjunction with the other parts of ISO 20474, which give the provisions that are specific to particular machine families. Those specific requirements take precedence over the requirements of this document for the machines concerned. For multipurpose machinery, all of those parts of ISO 20474 whose requirements cover the functions and applications of such machines are applicable.

EXAMPLE For a compact loader also used as a trencher, the relevant requirements of ISO 20474‑1, ISO 20474‑3 and ISO 20474‑10 are applicable.

ISO 20474-1:2017 deals with all significant hazards, hazardous situations and events relevant to the earth-moving machinery within its scope (see Annex A) when used as intended or under conditions of misuse reasonably foreseeable by the manufacturer. It specifies the appropriate technical measures for eliminating or reducing risks arising from relevant hazards, hazardous situations or events during commissioning, operation and maintenance.

Specific requirements related to autonomous machines are covered in ISO 17757.

ISO 20474-1:2017 is not applicable to machines manufactured before the date of its publication.

ISO 20474-2:2017

Earth-moving machinery - Safety - Part 2: Requirements for dozers

ISO 20474-2:2017 gives the safety requirements specific to wheeled dozers and crawler dozers as defined in ISO 6165 as well as for the rear-mounted winches on dozers. It is intended to be used in conjunction with ISO 20474‑1, which specifies general safety requirements common to two or more earth-moving machine families. The specific requirements given in this document take precedence over the general requirements of ISO 20474‑1.

ISO 20474-2:2017 deals with all significant hazards, hazardous situations and events relevant to the earth-moving machinery within its scope (see ISO 20474‑1:2017, Annex A) when used as intended or under conditions of misuse reasonably foreseeable by the manufacturer. It specifies the appropriate technical measures for eliminating or reducing risks arising from relevant hazards, hazardous situations or events during commissioning, operation and maintenance.

ISO 20474-2:2017 is not applicable to machines manufactured before the date of its publication.

ISO 20474-3:2017

Earth-moving machinery - Safety - Part 3: Requirements for loaders

ISO 20474-3:2017 used in conjunction with ISO 20474-1, which specifies general safety requirements common to two or more earth-moving machine families. The specific requirements given in this document take precedence over the general requirements of ISO 20474-1.

ISO 20474-3:2017 deals with all significant hazards, hazardous situations and events relevant to the earth-moving machinery within its scope (see ISO 20474-1:2017, Annex A) when used as intended or under conditions of misuse reasonably foreseeable by the manufacturer. It specifies the appropriate technical measures for eliminating or reducing risks arising from relevant hazards, hazardous situations or events during commissioning, operation and maintenance.

ISO 20474-3:2017 is not applicable to machines manufactured before the date of its publication.

ISO 20474-4:2017

Earth-moving machinery - Safety - Part 4: Requirements for backhoe loaders

ISO 20474-4:2017 gives the safety requirements specific to wheeled and crawler backhoe loaders as defined in ISO 6165. It is intended to be used in conjunction with ISO 20474‑1, which specifies general safety requirements common to two or more earth-moving machine families. The specific requirements given in this document take precedence over the general requirements of ISO 20474‑1.

ISO 20474-4:2017 deals with all significant hazards, hazardous situations and events relevant to the earth-moving machinery within its scope (see ISO 20474‑1:2017, Annex A) when used as intended or under conditions of misuse reasonably foreseeable by the manufacturer. It specifies the appropriate technical measures for eliminating or reducing risks arising from relevant hazards, hazardous situations or events during commissioning, operation and maintenance.

ISO 20474-4:2017 is not applicable to machines manufactured before the date of its publication.

ISO 20474-5:2017

Earth-moving machinery - Safety - Part 5: Requirements for hydraulic excavators

ISO 20474-5:2017 gives the safety requirements specific to hydraulic excavators as defined in ISO 6165. It is intended to be used in conjunction with ISO 20474-1, which specifies general safety requirements common to two or more earth-moving machine families. The specific requirements given in this document take precedence over the general requirements of ISO 20474-1.

ISO 20474-5:2017 deals with all significant hazards, hazardous situations and events relevant to the earth-moving machinery within its scope (see ISO 20474-1:2017, Annex A) when used as intended or under conditions of misuse reasonably foreseeable by the manufacturer. It specifies the appropriate technical measures for eliminating or reducing risks arising from relevant hazards, hazardous situations or events during commissioning, operation and maintenance.

ISO 20474-5:2017 is not applicable to machines manufactured before the date of its publication.

ISO 20474-6:2017

Earth-moving machinery - Safety - Part 6: Requirements for dumpers

ISO 20474-6:2017 gives the safety requirements specific to wheeled and crawler dumpers as defined in ISO 6165, including compact dumpers with seated or standing operator. It is not applicable to dumpers primarily designed for use on public roads. It is intended to be used in conjunction with ISO 20474‑1, which specifies general safety requirements common to two or more earth-moving machine families. The specific requirements given in this document take precedence over the general requirements of ISO 20474‑1.

ISO 20474-6:2017 deals with all significant hazards, hazardous situations and events relevant to the earth-moving machinery within its scope (see ISO 20474‑1:2017, Annex A) when used as intended or under conditions of misuse reasonably foreseeable by the manufacturer. It specifies the appropriate technical measures for eliminating or reducing risks arising from relevant hazards, hazardous situations or events during commissioning, operation and maintenance.

ISO 20474-6:2017 is not applicable to machines manufactured before the date of its publication.

ISO 20474-7:2017

Earth-moving machinery - Safety - Part 7: Requirements for scrapers

ISO 20474-7:2017 gives the safety requirements specific to wheeled scrapers and crawler scrapers, excepting towed scrapers, as defined in ISO 6165. It is intended to be used in conjunction with ISO 20474-1, which specifies general safety requirements common to two or more earth-moving machine families. The specific requirements given in this document take precedence over the general requirements of ISO 20474‑1.

ISO 20474-7:2017 gives the safety requirements specific to wheeled scrapers and crawler scrapers, deals with all significant hazards, hazardous situations and events relevant to the earth-moving machinery within its scope (see ISO 20474-1:2017, Annex A) when used as intended or under conditions of misuse reasonably foreseeable by the manufacturer. It specifies the appropriate technical measures for eliminating or reducing risks arising from relevant hazards, hazardous situations or events during commissioning, operation and maintenance.

ISO 20474-7:2017 gives the safety requirements specific to wheeled scrapers and crawler scrapers, is not applicable to machines manufactured before the date of its publication.

ISO 20474-8:2017

Earth-moving machinery - Safety - Part 8: Requirements for graders

ISO 20474-8:2017 gives the safety requirements specific to graders as defined in ISO 6165. It is intended to be used in conjunction with ISO 20474‑1, which specifies general safety requirements common to two or more earth-moving machine families. The specific requirements given in this document take precedence over the general requirements of ISO 20474‑1.

ISO 20474-8:2017 deals with all significant hazards, hazardous situations and events relevant to the earth-moving machinery within its scope (see ISO 20474‑1:2017, Annex A) when used as intended or under conditions of misuse reasonably foreseeable by the manufacturer. It specifies the appropriate technical measures for eliminating or reducing risks arising from relevant hazards, hazardous situations or events during commissioning, operation and maintenance.

ISO 20474-8:2017 is not applicable to machines manufactured before the date of its publication.

ISO 20474-9:2017

Earth-moving machinery - Safety - Part 9: Requirements for pipelayers

ISO 20474-9:2017 gives the safety requirements specific to pipelayers as defined in ISO 6165. It is intended to be used in conjunction with ISO 20474-1, which specifies general safety requirements common to two or more earth-moving machine families. The specific requirements given in this document take precedence over the general requirements of ISO 20474-1.

ISO 20474-9:2017 deals with all significant hazards, hazardous situations and events relevant to the earth-moving machinery within its scope (see ISO 20474-1:2017, Annex A) when used as intended or under conditions of misuse reasonably foreseeable by the manufacturer. It specifies the appropriate technical measures for eliminating or reducing risks arising from relevant hazards, hazardous situations or events during commissioning, operation and maintenance.

ISO 20474-9:2017 is not applicable to machines manufactured before the date of its publication.

ISO 20474-10:2017

Earth-moving machinery - Safety - Part 10: Requirements for trenchers

ISO 20474-10:2017 gives the safety requirements specific to trenchers as defined in ISO 6165. It is intended to be used in conjunction with ISO 20474‑1, which specifies general safety requirements common to two or more earth-moving machine families. The specific requirements given in this document take precedence over the general requirements of ISO 20474‑1.

ISO 20474-10:2017 deals with all significant hazards, hazardous situations and events relevant to the earth-moving machinery within its scope (see ISO 20474‑1:2017, Annex A) when used as intended or under conditions of misuse reasonably foreseeable by the manufacturer. It specifies the appropriate technical measures for eliminating or reducing risks arising from relevant hazards, hazardous situations or events during commissioning, operation and maintenance.

ISO 20474-10:2017 is not applicable to machines manufactured before the date of its publication.

ISO 20474-11:2017

Earth-moving machinery - Safety - Part 11: Requirements for landfill compactors

ISO 20474-11:2017 gives the safety requirements specific to landfill compactors as defined in ISO 6165. It is intended to be used in conjunction with ISO 20474‑1, which specifies general safety requirements common to two or more earth-moving machine families. The specific requirements given in this document take precedence over the general requirements of ISO 20474‑1.

ISO 20474-11:2017 deals with all significant hazards, hazardous situations and events relevant to the earth-moving machinery within its scope (see ISO 20474‑1:2017, Annex A) when used as intended or under conditions of misuse reasonably foreseeable by the manufacturer. It specifies the appropriate technical measures for eliminating or reducing risks arising from relevant hazards, hazardous situations or events during commissioning, operation and maintenance.

ISO 20474-11:2017 is not applicable to machines manufactured before the date of its publication.

NOTE Roller compactors are dealt with by ISO 20474‑13.

ISO 20474-12:2017

Earth-moving machinery - Safety - Part 12: Requirements for cable excavators

ISO 20474-12:2017 gives the safety requirements specific to cable excavators as defined in ISO 6165. It is intended to be used in conjunction with ISO 20474‑1, which specifies general safety requirements common to two or more earth-moving machine families. The specific requirements given in this document take precedence over the general requirements of ISO 20474‑1.

ISO 20474-12:2017 deals with all significant hazards, hazardous situations and events relevant to the earth-moving machinery within its scope (see ISO 20474‑1:2017, Annex A) when used as intended or under conditions of misuse reasonably foreseeable by the manufacturer. It specifies the appropriate technical measures for eliminating or reducing risks arising from relevant hazards, hazardous situations or events during commissioning, operation and maintenance.

It is applicable only to the machine itself if the cable excavator is intended for use in combination with other equipment or attachments such as drill rigs and those for pile driving or extracting and moving (e.g. rail-track, walking legs, pontoon, ship equipment or stationary undercarriages). It does not deal with the specific hazards relevant to such additional equipment or attachments.

ISO 20474-12:2017 is not applicable to machines manufactured before the date of its publication.

ISO 20474-13:2017

Earth-moving machinery - Safety - Part 13: Requirements for rollers

ISO 20474-13:2017 gives the safety requirements specific to rollers as defined in ISO 6165. It is intended to be used in conjunction with ISO 20474‑1, which specifies general safety requirements common to two or more earth-moving machine families. The specific requirements given in this document take precedence over the general requirements of ISO 20474‑1.

ISO 20474-13:2017 deals with all significant hazards, hazardous situations and events relevant to the earth-moving machinery within its scope (see ISO 20474‑1:2017, Annex A) when used as intended or under conditions of misuse reasonably foreseeable by the manufacturer. It specifies the appropriate technical measures for eliminating or reducing risks arising from relevant hazards, hazardous situations or events during commissioning, operation and maintenance.

ISO 20474-13:2017 is not applicable to machines manufactured before the date of its publication.

ISO 20474-15:2019

Earth-moving machinery - Safety - Part 15: Requirements for compact tool carriers

This document gives the safety requirements specific to compact tool carriers. It is intended to be used in conjunction with ISO 20474‑1, which specifies general safety requirements common to two or more earth-moving machine families. The specific requirements given in this document take precedence over the general requirements of ISO 20474‑1.

This document deals with all significant hazards, hazardous situations and events relevant to the earth-moving machinery within its scope (see ISO 20474‑1:2017, Annex A) when used as intended or under conditions of misuse reasonably foreseeable by the manufacturer. It specifies the appropriate technical measures for eliminating or reducing risks arising from relevant hazards, hazardous situations or events during commissioning, operation and maintenance.

This document is not applicable to machines manufactured before the date of its publication.