PDF Price
$343.00
Add to cart
This document defines fluid delivery performance test methods that cover the full range of use conditions of an infusion pump in order to provide clinically relevant data of how the pump will perform in use. This document is applicable to syringe pumps, container pumps, and volumetric infusion pumps for all indicated delivery modes including enteral, patient controlled analgesia (PCA), or epidural and prescribed infusate sources (e.g., volumetric infusion pump drawing from a syringe). This document does not establish criteria for the clinical acceptability of infusion pump performance, provide guidance for test method validation, or address uncertainty of measurement.
The purpose of this document is to provide guidance to multiple stakeholders on the appropriate use of public cloud computing in support of the operation of regulated medical devices. Cloud service providers, medical device manufacturers, regulatory professionals, and regulators should be able to use this document to identify best practices that ensure the public cloud computing environment underlying medical devices works within the spirit and the letter of regulations designed to improve patient outcomes, while also being safe and effective. This TIR supersedes AAMI CR510:2021; Appropriate use of public cloud computing for quality systems and medical devices.
This technical information report provides guidance on how to complete an Assurance Case Report in order to comply with the new additional FDA pre-market requirements for infusion pumps. It includes a detailed but strictly hypothetical example from the medical device domain. This TIR provides information useful to creating and maintaining safety assurance cases for medical devices, including drug delivery combination products. It does this in the context of ANSI/AAMI/ISO 14971 and ISO/IEC 15026-2. A safety assurance case serves as a detailed risk management report that, as part of the risk management file, should be maintained according to the requirements of ANSI/AAMI/ISO 14971. There is additional discussion about the relationship between risk management and safety assurance cases in clause 7.
This technical information report (TIR) provides the details of how to correctly build, calibrate, and use the CMR test circuit specified in ECG performance standards. It also preserves the history, rationale, and performance requirements of the test method, as included in ANSI/AAMI EC13:2002, Cardiac monitors, heart rate meters, and alarm s, which was revised by the adoption and finalization of ANSI/AAMI/IEC 60601-2-27:2011, Medical electrical equipment—Part 2-27: Particular requirements for the basic safety and essential performance of electrocardiographic monitoring equipment.
This standard provides guidelines for point of use treatment, transporting, leak testing (where indicated), cleaning, packaging (where indicated), high-level disinfecting and/or sterilizing, storage, and quality control procedures of flexible gastrointestinal (GI) endoscopes, flexible bronchoscopes, flexible ear, nose, and throat endoscopes, flexible urology endoscopes, and other types of reusable flexible endoscopes used in procedural and surgical settings, and semi-rigid operative endoscopes (e.g., choledochoscopes) used in healthcare facilities. These guidelines are intended to provide comprehensive information and direction for healthcare personnel in the processing of these reusable devices and accessories to render them safe for patient use.
This technical report provides a method for measuring power output versus wind speed for an entire wind farm. This is distinct from IEC 61400-12-1 and 61400-12-2 which are intended to provide methods for measuring power performance of an individual Wind Turbine Generator (WTG).
2018 marks the 100th anniversary of the American National Standards Institute (ANSI). To celebrate, the Institute commissioned a custom art piece, created by Lawrence Romorini of One Of A Kind, Inc. Art Studio, that takes you on a journey through a century of standardization. Beginning at the top and moving counterclockwise, significant moments in ANSI's history are captured through objects, images, and reproductions. This 24 x 36 poster reproduction of the art piece makes a great gift for any standards fan. The retail price of $20.18 includes shipping to any U.S. mailing address. The poster will be subject to a 3-5 day handling period before shipping via USPS First Class Mail in a square mailing tube. The poster will be shipped with a 8.5 x 11 paper key that offers more detail about each item pictured. International customers should reach out to [email protected] for more information before ordering, as international shipping is not included in the price. The button at right reads "Buy PDF from ANSI" but please be aware that you are purchasing a hard-copy paper poster. For more information about ANSI's 100th anniversary or to see an interactive version of the art piece, visit www.ansi.org/100 .
Aims at eliminating injuries to operating, maintenance, and setup personnel working on or adjacent to screen changers and at minimizing accidental damage to equipment.
Applies to all monofilament postextrusion equipment, including quench tanks, slitting stands, draw rolls, delustering rolls, ovens, and yarn or thread winders.
Establishes the safety requirements for the design, care, and use of power-driven brushing tools to reflect the balanced best interests of the brush manufacturers, the brush users, and the brush machine manufacturers recognizing that safety must be a cooperative effort shared equally by each group.
The purpose of this standard is to establish the rules and specifications for safety that apply in the design, use, and care of powerdriven brushing tools. It includes specifications for shanks, adapters, flanges, collets, chucks, and safety guards and rules for the proper storage, handling, mounting, and use of brushes. It embraces all configurations of brushing tools whose functional performance is accomplished by power-driven operation. Covered are brushing tools whose brushing elements are made up of ferrous wire, nonferrous wire, plastic, abrasive filaments, vegetable fibers, animal hair, or other materials, and brushes fabricated with any combination of such elements.
The purpose of this standard is to establish the rules and specifications for safety that apply in the design, use, and care of powerdriven brushing tools. It includes specifications for shanks, adapters, flanges, collets, chucks, and safety guards and rules for the proper storage, handling, mounting, and use of brushes. It embraces all configurations of brushing tools whose functional performance is accomplished by power-driven operation. Covered are brushing tools whose brushing elements are made up of ferrous wire, nonferrous wire, plastic, abrasive filaments, vegetable fibers, animal hair, or other materials, and brushes fabricated with any combination of such elements.
The purpose of this standard is to establish the rules and specifications for safety that apply in the design, use, and care of powerdriven brushing tools. It includes specifications for shanks, adapters, flanges, collets, chucks, and safety guards and rules for the proper storage, handling, mounting, and use of brushes. It embraces configurations of brushing tools whose functional performance is accomplished by power-driven operation. Covered are brushing tools whose brushing elements are made up of ferrous wire, nonferrous wire, plastic, abrasive filaments, vegetable fibers, animal hair, or other materials, and brushes fabricated with any combination of such elements.
Covers design, installation and operational procedures for Aerial Passenger Ropeways, which include Aerial Tramways, Aerial Lifts, Surface Lifts, Tows and Conveyeors. New material was added and reorganized for detachable grip specifications and the Wire Rope section. The Tows section was revised to address the usage in recreational tubing on snow. A new section covers Conveyors for skier transportation.
Covers design, installation and operational procedures for Aerial Passenger Ropeways, which include Aerial Tramways, Aerial Lifts, Surface Lifts, Tows and Conveyeors. New material was added and reorganized for detachable grip specifications and the Wire Rope section. The Tows section was revised to address the usage in recreational tubing on snow. A new section covers Conveyors for skier transportation.
This document establishes a standard for the design, manufacture, construction, operation, and maintenance of passenger ropeways. For this standard, passenger ropeway categories include: aerial tramways (single and double reversible); aerial lifts (detachable lifts, chair lifts, and similar equipment); surface lifts (T-bar lifts, J-bar lifts, platter lifts, and similar equipment); tows (wire rope and fiber rope tows); and conveyors
This document establishes a standard for the design, manufacture, construction, operation, and maintenance of passenger ropeways. For this standard, passenger ropeway categories include: aerial tramways (single and double reversible); aerial lifts (detachable lifts, chair lifts, and similar equipment); surface lifts (T-bar lifts, J-bar lifts, platter lifts, and similar equipment); tows (wire rope and fiber rope tows); and conveyors
This document establishes a standard for the design, manufacture, construction, operation, and maintenance of passenger ropeways. For this standard, passenger ropeway categories include: aerial tramways (single and double reversible); aerial lifts (detachable lifts, chair lifts, and similar equipment); surface lifts (T-bar lifts, J-bar lifts, platter lifts, and similar equipment); tows (wire rope and fiber rope tows); conveyors.
This document establishes a standard for the design, manufacture, construction, operation, and maintenance of passenger ropeways. For this standard, passenger ropeway categories include: aerial tramways (single and double reversible); aerial lifts (detachable lifts, chair lifts, and similar equipment); surface lifts (T-bar lifts, J-bar lifts, platter lifts, and similar equipment); tows (wire rope and fiber rope tows); and conveyors.
Establishes a standard for the design, manufacture, construction, operation, and maintenance of funiculars for passenger transport. Funicular systems may have a single carrier, or group of carriers, that move back and forth on a guideway. Carriers reciprocate between the terminals, propelled and controlled by a wire rope or other flexible element operating through drive and tensioning equipment installed in the terminals.
This document establishes a standard for the design, manufacture, construction, operation, and maintenance of funiculars for passenger transport.
The purpose of this document is to provide organizations with requirements to deliver high-quality healthcare and specifies requirements for management systems for quality in healthcare organizations when an organization desires to: a. demonstrate its ability to consistently meet service user, stakeholder, and applicable statutory and regulatory requirements; b. enhance service user experience during the continuum of care and continually improve healthcare quality; and c. create and maintain processes that ensure timely, safe, effective, efficient, equitable, and people- centered care. The requirements of this document are based on recognized best practices and are intended to be applicable to any organization providing healthcare services, regardless of its type, size, or the services it provides.
This document provides requirements for patient-centered staffing in healthcare settings. It is generic and applicable to any healthcare organization.
This document specifies hand hygiene training, compliance benchmarking, performance/feedback, and facility requirements for healthcare facilities that operate hand hygiene systems. This document covers facility readiness, hand hygiene education and training, monitoring, performance, promotion and identifying key issues that require attention for improvement. Procedures for surgical hand preparation are not addressed in this document. Furthermore, this document does not take into consideration, surface disinfection, instrument disinfection, ultraviolet irradiation (UV-C), heat sterilization, room fogging or electrostatic spraying devices and any other methods typically not designed or suitable for human hand hygiene purposes. Excluding surgical hand preparation, this document applies specifically to clinical healthcare workers, patients and visitors.
This document provides a standardized set of architectural floor plan and reflected ceiling plan symbols for audio, video and control systems, with associated technologies such as environmental control and communication networks. The common set of blueprint icons represents all facets of pre-wire and installation of electronic systems, products and devices in residential and commercial environments. It also includes descriptions and guidelines for the use of these symbols. Joint standard from CEA, CEDIA and InfoComm.
Provides parameters for emergency response procedures for shippers and carriers, and their interface with state and local law enforcement and fire personnel in the event of highway transportation accidents involving radioactive materials. A basic emergency action program is outlined along with supplemental steps to be taken when radioactive cargo is involved.
Relates to the preparation and distribution of operating manuals for use, maintenance, and inspection of packaging for shipping radioactive materials. The standard prescribes the contents and their arrangement and contains a model manual that can be used as a pattern. It is generally applicable to packages for greater than A1/A2 quantity and highway route-controlled materials, but it should also be used to be the extent applicable for other packaging.
This standard presents guidance and performance criteria for the safe highway truck transport of weight-concentrated radioactive loads. The standard provides detailed procedures for inservice inspections, testing, and quality assurance of these semi-trailer configurations (excluding the tractor).
This American National Standard sets forth the requirements for design, fabrication, testing, maintenance, and quality assurance programs for special lifting devices for containers for radioactive materials.
This standard integrates terminology and job/task assessments with training requirements to provide guidelines for facilities and organizations assets the need for qualification and certification of personnel performing safeguards tasks or functions. In defining the guidance for qualification and certification of safeguards personnel, this document addresses the applicable aspects of: 1) job/task assessments, 2) training of personnel, 3) evaluating and testing of methodologies, 4) requalification or recertification requirements, 5) disqualification or decertification requirements, and 6) documentation record keeping requirements pertaining to qualification and certification.
Consists of specifications and dimensions for wood utility poles that are to be given preservation treatment as specified by the purchaser. The poles described are considered as simple cantilever members subject to transverse loads only. Requirements for the preservation treatment of poles are not included although the effects of conditioning are accounted for.
This standard provides minimum specifications for the quality and dimensions of wood poles that are to be used as single-pole utility structures. The poles described herein are considered as simple cantilever members subject to transverse loads only. Fiber strength values, provided as a basis for determining pole class sizes, apply only to poles that meet or exceed the minimum quality specifications.
This standard provides minimum specifications for the quality and dimensions of wood poles that are to be used as single-pole utility structures. The poles described herein are considered as simple cantilever members subject to transverse loads only. Fiber strength values, provided as a basis for determining pole class sizes, apply only to poles that meet or exceed the minimum quality specifications.
This standard provides minimum specifications for the quality and dimensions of wood poles that are to be used as single-pole utility structures. The poles described herein are considered as simple cantilever members subject to transverse loads only. Fiber strength values, provided as a basis for determining pole class sizes, apply only to poles that meet or exceed the minimum quality specifications.
Covers requirements for manufacturing and quality control of structural glued laminated timber of Southern Pine, Coastal Region Douglas Fir, Hem Fir and other species of similar treatability for electric power and communication structures. This standard is supplemental to ANSI/AITC A190.1 and provides descriptions of the special manufacturing and design requirements for glued laminated utility structures.
This standard consists of specifications covering solid sawn-wood crossarms and braces manufactured from costal Douglas-fir grown in the West Coast region and from dense Southern pine.
This standard consists of specifications covering solid sawn-wood crossarms and braces manufactured from coastal Douglas-fir (Pseudotsuga menziesii - variety menziesii) grown in the West Coast region (i.e., from the summit area of the Cascade Mountains of Washington, Oregon, California, and British Columbia, Canada) to the Pacific Ocean; and from dense Southern pine of the following species: longleaf pine (Pinus palustris), shortleaf pine (Pinus echinata), loblolly pine (Pinus taeda), and slash pine (Pinus elliottii). The specifications are intended to cover communications crossarms, power crossarms, heavy-duty crossarms, and heavy-duty braces. Crossarms are intended primarily for use as beams. Heavy-duty crossarms may also be used as struts or columns in braced H-frames. Braces are used for tension, compression-bracing, or both.
This standard consists of specifications covering solid sawn-wood crossarms and braces manufactured from coastal Douglas-fir (Pseudotsuga menziesii - variety menziesii) grown in the West Coast region (i.e., from the summit area of the Cascade Mountains of Washington, Oregon, California, and British Columbia, Canada) to the Pacific Ocean; and from dense Southern pine of the following species: longleaf pine (Pinus palustris), shortleaf pine (Pinus echinata), loblolly pine (Pinus taeda), and slash pine (Pinus elliottii), as well as ground wire moulding manufactured from Douglas-fir (Pseudotsuga menziesii) or red oak (Quercus rubra group). The specifications are intended to cover communications crossarms, power crossarms, heavy-duty crossarms, heavy-duty braces, and ground wire moulding. Crossarms are intended primarily for use as beams. Heavy-duty crossarms may also be used as struts or columns in braced H-frames. Braces are used for tension and/or compression-bracing. Ground wire moulding is used to protect the ground wire at the base of the pole.
This standard consists of specifications covering solid sawn-wood crossarms and braces manufactured from coastal Douglas-fir (Pseudotsuga menziesii - variety menziesii) grown in the West Coast region (i.e., from the summit area of the Cascade Mountains of Washington, Oregon, California, and British Columbia, Canada) to the Pacific Ocean; and from dense Southern pine of the following species: longleaf pine (Pinus palustris), shortleaf pine (Pinus echinata), loblolly pine (Pinus taeda), and slash pine (Pinus elliottii), as well as ground wire moulding manufactured from Douglas-fir (Pseudotsuga menziesii) or red oak (Quercus rubra group). The specifications are intended to cover communications crossarms, power crossarms, heavy-duty crossarms, heavy-duty braces, and ground wire moulding. Crossarms are intended primarily for use as beams. Heavy-duty crossarms may also be used as struts or columns in braced H-frames. Braces are used for tension and/or compression-bracing. Ground wire moulding is used to protect the ground wire at the base of the pole.
Consist of specification and dimensions for Naturally Durable Hardwoods for utility wood poles. These wood species do not require preservative treatment for field use. The poles described are considered as simple cantilever members subject to transversal loads only.
Consist of specification and dimensions for Naturally Durable Hardwoods for utility wood poles. These wood species do not require preservative treatment for field use. The poles described are considered as simple cantilever members subject to transversal loads only.
This standard provides minimum specifications for the quality and dimenstions of wood moulding used to protect groun qires on utility pole structures.
This standard provides minimum specifications for the quality and dimensions of wood moulding used to protect ground wires on utility pole structures.
This standard provides minimum specifications for the quality and dimensions of wood moulding used to protect ground wires on utility pole structures.
This standard consists of specifications covering solid sawn-naturally durable hardwood crossarms and braces.
This Technical Report (TR) has been developed to assist users of American National Standard O5.1.2008 in the inspection of wood utility poles prior to treatment.
This standard defines and provides a benchmark for the process of remanufacturing, and establishes specifications that characterize the remanufacturing process and differentiate remanufacturing from other practices.
This standard defines and provides a benchmark for the process of remanufacturing, and establishes specifications that characterize the remanufacturing process and differentiate remanufacturing from other practices.
Encompasses Purpose and Scope, Referenced Publications, Definitions, Performance, Test Procedures, Certification, and Consumer Information concerning tricycle safety.
This standard covers the safety requirements for all tricycles intended for use by children 8 years and under.
This standard covers the safety requirements for all tricycles intended for use by children 8 years and under. While the addition of a push handle does not by itself change the classification of a product from a tricycle to a stroller (or other juvenile product), there exist in the marketplace some hybrid products (i.e., tricycle/stroller combinations that have canopies, reclining seats, and/or restraint systems, etc.) that are intended and marketed to fulfill both functions. Such products may need to meet the requirements of ASTM F833 (Standard Consumer Safety Performance Specification for Carriages and Strollers) or other applicable standards, in addition to those of this standard.
Procedures for third-party certification programs with reference to ISO and ISO/IEC Guides 2, 7, 23, 25, 27, 28, 39, 40, 53, and 56, and 60 ISO 9001, 9002, and 9003.
Prescribes minimum sanitary requirements for the protection of the health of employees in permanent places of employment.
This standard applies to all permanent places of employment, except where domestic, mining or common carrier transportation work only is performed. It does not apply to family housing provided by the employer in one- or two-family dwellings, nor to temporary labor camps; the latter are covered by American National Standard Minimum Requirements for Sanitation in Temporary Labor Camps, ANSI Z4.4-1995. Measures to control toxic materials are also outside the scope of this standard.
This standard applies to sanitary waste-disposal systems for all places of employment where such systems are not connected to a sanitary sewer, septic tank or on-site sewage-disposal treatment facility.
Prescribes minimum environmental health requirements for camps (whether temporary or permanent) for temporary labor, which includes persons with or without their families employed in any occupation or work for such quarters are provided.
This standard prescribes minimum environmental health requirements for camps (whether temporary or permanent) for temporary labor that will include persons with or without their families employed in any occupation or work for which labor-force quarters are provided and for field sanitation.
Applies to the safety requirements for the operation and use of commercial and industrial laundry and drycleaning equipment.
This standard applies to the safety design and safe operation of equipment and some system(s) used in commercial and institutional laundries and drycleaning plants. It does not apply to coin-operated or ticket-operated laundries or drycleaning centers. For commercial drycleaning operations, this standard shall be used in conjunction with American National Standard for Drycleaning Plants, ANSI/NFPA 32.
Establishes specifications and methods of test for the safety properties of glazing material (glazing material designed to promote safety and to reduce or minimize the likelihood of cutting and piercing injuries when said glazing material is broken by human contact) as used for all building and architectural.
Provides guidelines for the safe design, care and use of power-driven brushing tools. Responsibilities of all parties involved in the usage chain from designer and manufacturer to specifier and user.
ANSI/ABMSPSDO®ASN-001-2018 provides a standard for the manufacture of inserts for diabetic footwear. The standard applies to custom fabricated, off-the-shelf (OTS), and “Library” inserts and is supported by current, widely accepted medical practice. It is based on scientific research documented by relevant, peer-reviewed literature, and provider outcomes. ANSI/ABMSPSDO®ASN-001-2018 requires the applicant organization to • A written , documented statement of the insert’s technical specifications for which accreditation by this standard is sought, • Written proof of Current FDA Registration and Licensure to manufacture the insert for which accreditation by this standard is sought, • Written proof of product validation by the Centers for Medicare & Medicaid Services (CMS) of the insert for which accreditation by this standard is sought, and • Written proof that clearly documents either an in-house or out-sourced product quality assurance program for the manufacturing process of the insert for which accreditation by this standard is sought.
The Emission Factors will include emission estimates from the open molding processes used in the composites industry. They will provide the user with a mechanism to estimate emissions based on the production process, materials being used and techniques employed. The final emission estimates will satisfy state and federal requirements for permit compliance and reporting emissions on Form R as required by the Emergency Planning and Community Right-to-Know Act.
This standard specification encompasses the design, materials, properties, manufacturing, quality control, assembly and installation, and inspection of directly embedded FRP utility poles. The standard provides information and guidance to end-users at investor-owned, municipal and rural electric utilities, allowing them to readily adopt composite products through internal specification documents. The standard has three sections including 1) General Considerations, 2) Pole Specifications, and 3) Recommended Construction Guidelines. The standard covers applications such as cantilevered, framed and combined structures. This specification does not cover cross arms, lattice structures, conductors, insulators, stand-offs or other FRP components used in the electrical grid. The standard is intended to educate users on the materials and processing aspects of FRP utility poles so they can select the best product solution for the application. In addition, this standard will help engineers and specifiers understand the differences of FRP composites relative to wood, concrete and steel when considering the intended application and use, as well as the important aspects of attachments and pole installation specific to FRP materials.
This standard provides a method for evaluation of wind turbine systems in terms of safety, reliability, power performance, and acoustic characteristics. This standard for small wind turbines is derived from existing international wind turbine standards developed under the auspices of the International Electrotechnical Commission (IEC). Specific departures from the IEC standards are provided to streamline their use and to present their results in a more consumer-friendly manner.
This standard provides a method for predicting sound pressure levels based on the ISO 9613-2 standard for propagation of sound outdoors utilizing the apparent wind turbine model-specific sound power level determined in accordance with International Electrotechnical Commission (IEC) 61400-11 for the downwind location.
This standard provides definitions related to specific acronyms and terms contained in the Wind Technician Entry-Level Training standards.
A competency standard to serve as the recommended curriculum for prospective or new wind technicians. To assist employers, workforce development and training professionals, academia. and others with the minimum educational and training-related requirements for entry level Wind Energy Technicians. This standard will outline the minimum requirements for educational and training program’s learning objectives, knowledge, and skills needed for an entry level wind energy technician position.
This document applies to offshore wind farm assets that extract kinetic energy from wind, transmit electricity to shore-based grids, and/or store energy using facilities or devices located offshore or on land. The scope includes wind farm assets that may potentially be installed in state and federal waters in the contiguous U.S., Alaska, and Hawaii, including inland bodies of water such as the Great Lakes. The scope includes wind farm assets installed in salt or fresh water with a rotor swept area greater than 200 m2. The scope includes the design, manufacturing, installation, commissioning, operation and service, decommissioning, and re-powering within the project life-cycle cycle of a wind farm. The equipment covered in the scope shall include rotor-nacelle assemblies, towers, substructures, foundations, offshore substations, inter-array and export cables (by reference to ACP OCRP-5 Recommended Practices for Submarine Cables), measurement and monitoring equipment, and any other permanently installed auxiliary platforms or equipment.
The Scope of this standard shall be to define: Repairable damages; the process of windshield repair; the performance criteria for repaired laminated glass. This standard shall also provide best practices for the training of a repair technician.
This standard covers safety requirements for the design, construction, testing, and validation of automotive lifts of the following types: manually driven, power driven, stationary, and mobile. Lifts that are movable or are designed to tilt the superstructure, or are not "automotive vehicle service lifts" are outside the scope of this standard.
This safety guide for the performance of critical experiments is intended for universal applicability and is formulated in general terms in order to avoid imposing undue limitations on specific local experiment practices.
This standard provides for the safe conduct of critical experiments. Such experiments study neutron behavior in a fission device where the energy produced is insufficient to require auxiliary cooling, and the power history is such that the inventory of long-lived fission products is insignificant.
This standard provides recommended programming practices and requirements to facilitate the portability of computer programs prepared for scientific and engineering computations.
This standard provides recommended programming practices and requirements to facilitate the portability of computer programs prepared for scientific and engineering computations.
This standard addresses the documentation of computer software prepared for scientific and engineering applications.
This standard provides guidelines for the verification and validation of scientific and engineering computer programs developed for use by the nuclear industry.
This standard provides guidelines for the verification and validation (V&V) of non-safety-related scientific and engineering computer programs developed for use by the nuclear industry. The scope is restricted to research and other non-safety-related, noncritical applications.
This standard provides guidelines for the verification and validation (V&V) of non-safety-related scientific and engineering computer programs developed for use by the nuclear industry. The scope is restricted to research and other non-safety-related, noncritical applications.
This standard presents criteria for accommodating user needs in the preparation of computer software for scientific and engineering applications.
This standard presents criteria for accommodating user needs in the preparation of computer software for scientific and engineering applications.
This standard presents criteria for accommodating user needs in the preparation of computer software for scientific and engineering applications.
This standard provides minimum requirements for assurance that high-integrity software developed for use by the nuclear industry meetsstate-of-the-practice expectations for quality. The requirements in this standard are specified for development of high-integrity software. The intent is to set a minimum level of quality assurance and critical technical process requirements to satisfy due diligence.
This standard provides minimum requirements for assurance that high-integrity software developed for use by the nuclear industry meetsstate-of-the-practice expectations for quality. The requirements in this standard are specified for development of high-integrity software. The intent is to set a minimum level of quality assurance and critical technical process requirements to satisfy due diligence.
This standard provides minimum requirements for assurance that high-integrity software developed for use by the nuclear industry meetsstate-of-the-practice expectations for quality. The requirements in this standard are specified for development of high-integrity software. The intent is to set a minimum level of quality assurance and critical technical process requirements to satisfy due diligence.
This standard establishes the minimum requirements for the acceptance and use of non-real-time, high-integrity software used for design and analysis in the nuclear industry. This standard is directly related to ANSI/ANS-10.7-2013 which provides requirements for the developer of non-real-time, high-integrity software. The activities described in this standard enable an end user of complex simulation software to assure, when software has been developed in accordance with appropriate requirements, that the software will meet the specific identified needs of the end user and that the software is installed and used in a correct manner. The type of software discussed in this standard is software used for the analysis, design, and simulation of complex physical systems and phenomena. This type of software requires a high degree of functional reliability in order to reduce the risk of undetected errors.
This standard is for the guidance of those involved in the design, operation, and review of fast pulse reactors. It has been formulated in general terms to be applicable to all current fast pulse reactors. This standard does not apply to periodically pulsed reactors or booster assemblies. Operation and maintenance of fast pulse reactors shall be carried out in accordance with this standard and the other applicable ANS-14 and ANS-15 documents.
This standard is for those involved in the design, operation, and review of fast pulse reactors. It has been formulated in general terms to be applicable to all current fast pulse reactors. This standard does not apply to periodically pulsed reactors or booster assemblies.
This standard is for those involved in the design, operation, and review of fast pulse reactors. It has been formulated in general terms to be applicable to all current fast pulse reactors. This standard does not apply to periodically pulsed reactors or booster assemblies.
This standard identifies and establishes the content of technical specifications for research reactors. Areas addressed are as follows: Definitions, Safety Limits, Limiting Safety System Settings, Limiting Conditions for Operation, Surveillance Requirements, Design Features, and Administrative Controls. Sufficient detail is incorporated so that applicable specifications can be derived or extracted.
This standard identifies and establishes the content of technical specifications for research and test reactors. Areas addressed are: Definitions, Safety Limits, Limiting Safety System Settings,Limiting Conditions for Operation, Surveillance Requirements, Design Features, and Administrative Controls. Sufficient detail is incorporated so that applicable specifications can be derived or extracted.
This standard identifies and establishes the content of technical specifications for research and test reactors. Areas addressed are: Definitions, Safety Limits, Limiting Safety System Settings,Limiting Conditions for Operation, Surveillance Requirements, Design Features, and Administrative Controls. Sufficient detail is incorporated so that applicable specifications can be derived or extracted.
This standard identifies and establishes the content of technical specifications for research and test reactors. Areas addressed are: Definitions, Safety Limits, Limiting Safety System Settings,Limiting Conditions for Operation, Surveillance Requirements, Design Features, and Administrative Controls. Sufficient detail is incorporated so that applicable specifications can be derived or extracted.