Most recent

ANSI/ABMA 15-1991 (S2020)

Ball Bearings with Spherical Outside Surfaces and Extended Inner Ring Width (Includes Eccentric Locking Collars)

This Standard specifies boundary dimensions and tolerances for bearings with spherical outside surfaces and extended inner ring width and eccentric locking collars. These bearings are frequently mounted in housings having mating internal spherical surfaces to provide alignment at mounting. Relubrication features are optional and may be designed to interface with the lubrication zones of mating housings so that the bearings will be properly lubricated. The relubrication means in the outer ring, if used, shall be located on one or both sides of the outer ring zones, defined by dimensions in the tables, in such a way that lubricant will satisfactorily feed into the bearing from a housing bore groove covering the zone.

CONTENT PROVIDER
ABMA [abma]

Others Also Bought
Thrust Bearings of Ball and Cylindrical Roller Types - Inch Design
Thrust Needle Roller and Cage Assemblies and Thrust Washers - Metric Design
Rolling Element Bearings – Shaft Mounted – Locknuts, Sleeves, and Locking Devices – Inch Desig
Included in Packages
This standard is not included in any packages.
Document History
Amendments & Corrections
We have no amendments or corrections for this standard.