Most recent
CSA Z195.1-2016
Z195.1-16 - Guideline on selection, care, and use of protective footwear
Preface
This is the second edition of CSA Z195.1, Guideline for selection, care, and use of protective footwear. It supersedes the previous edition published in 2002. This Guideline covers the selection, use, and care of protective footwear and outlines the components necessary to implement an effective use of protective footwear in the workplace. This edition incorporates a new Table 1 to assist users on selection of appropriate protective footwear and understanding labelling requirements based on the type of hazards. This Guideline recommends that a hazard assessment be carried out on each job to determine the conditions under which work is performed.Introduction
This Guideline has been developed as a complementary document to CSA Z195-14, Protective footwear. It is intended to provide advice to protective footwear users and authorities having jurisdiction. While this Guideline is intended to be used separately from the Standard, many references are made to the Standard and most of the advice is based on the design, performance, and marking criteria provided in the Standard. Users seeking specific requirements for protective footwear should refer to the criteria contained in the Standard. The purpose of this Guideline is to a) assist users of footwear and their employers in the proper selection of the best footwear protection available for their particular working environment and specific job functions; b) assist employers, safety committees, and workers in identification of potential risks and hazards requiring protective footwear in their workplace; c) assist employers and safety committees in establishing and maintaining safety footwear programs that meet the requirements of reasonable care (due diligence) and continuous improvement in the prevention of injuries; and d) provide users with helpful tips for the proper selection, maintenance, and disposal of safety footwear. Note: While it is recognized that protective footwear plays a major role in injury prevention, users should be aware that personal protective equipment is only part of an overall foot protection program. Other important components include control of hazards through engineering solutions, work planning and organization to limit exposure, and administrative controls. Protective safety footwear compliant with CSA Z195 should be used in all Canadian jurisdictions and workplaces where there is risk of foot injury. Over-the-shoe toe protectors compliant with CSA Z334-14, Over-the-shoe toe protectors, are not to be considered to be protective safety footwear. These over-the-shoe toe protectors are designed only to provide basic protection from impacts to the toes of the users on a temporary basis. Temporary is considered to be short-term use such as that by visitors to a work site, or by individuals traversing a foot hazard area (i.e., not performing work in that area). The protection offered by CSA Z334 is not intended to protect wearers performing work in a hazard area. CSA Z334 might not provide adequate protection for visitors in all conditions; therefore, protective footwear certified to CSA Z195 is strongly recommended. Note: Users should be aware that there might be safety products available that do not comply with CSA Z195. When selecting protective footwear, users should look for evidence that the footwear does, in fact, comply with CSA Z195. See Clause 1.3 and Table 1 for the different marks that indicate that the footwear complies with the Standard. All users of safety footwear should refer to their respective federal and/or provincial statutes to ensure compliance with legal requirements governing protective footwear.Content Provider
CSA America, Inc. [csa]
