DS/EN 60730-2-6:2009

Automatic electrical controls for household and similar use - Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements

1.1 Replacement:*This part of IEC 60730 applies to automatic electrical pressure sensing controls with a minimum*gauge pressure rating of -60 kPa and a maximum gauge pressure rating of 4,2 MPa, for use in, on*or in association with, equipment for household and similar use that may use electricity, gas, oil,*solid fuel, solar thermal energy, etc. or a combination thereof, including heating, air-conditioning*and similar applications.*1.1.1 Replacement:*This standard applies to inherent safety, operating values, operating sequences where such are*associated with equipment protection, and to the testing of automatic electrical pressure sensing*controls used in, on or in association with, household and similar equipment.*Throughout this standard, the word equipment means appliance and equipment.*This standard does not apply to pressure sensing controls intended exclusively for industrial*applications.*This standard is also applicable to individual pressure sensing controls utilized as part of a control*system or pressure sensing controls which are mechanically integral with multi-functional controls*having non-electrical outputs.*Automatic electrical pressure sensing controls for equipment not intended for normal household*use, but which nevertheless may be used by the public, such as equipment intended to be used by*laymen in shops, in light industry and on farms, are within the scope of this standard.*This standard is also applicable to controls for appliances within the scope of IEC 60335-1.*See also Annex J.*1.1.2 Replacement:*This standard applies to automatic electrical controls, mechanically or electrically operated, responsive to or controlling a pressure or vacuum.*1.1.4 Replacement:*This standard applies to manual controls when such are electrically and/or mechanically integral*with pressure sensing controls.*Requirements for manual switches not forming part of an automatic control are contained in IEC 61058-1.*Addition:*1.1.101 This standard contains requirements for electrical features of pressure sensing controls*and requirements for mechanical features that affect their intended operation.*NOTE Subclause 18.101, as it pertains to gas and/or oil controls, is under consideration pending review or revision by*ISO/TC 109 and ISO/TC 161.*1.1.102 In general, these pressure sensing controls are integrated or incorporated with the*equipment or are intended to be integrated in, or on the equipment. This standard also covers*these controls when they are independently mounted. In-line cord controls are not covered by this*standard.*1.4 Replacement:*This standard applies also to pressure sensing controls incorporating electronic devices,*requirements for which are contained in Annex H.*This standard applies also to pressure sensing controls using NTC or PTC thermistors,*requirements for which are contained in Annex J.