Customer Service:
Mon - Fri: 8:30 am - 6 pm EST

 Historical

IEC 61851-1 Ed. 2.0 b:2010

Electric vehicle conductive charging system - Part 1: General requirements

"IEC 61851-1:2010 applies to on-board and off-board equipment for charging electric road vehicles at standard a.c. supply voltages (as per IEC 60038) up to 1 000 V and at d.c. voltages up to 1 500 V, and for providing electrical power for any additional services on the vehicle if required when connected to the supply network. It includes characteristics and operating conditions of the supply device and the connection to the vehicle; operators and third party electrical safety, and the characteristics to be complied with by the vehicle with respect to the a.c./d.c. EVSE, only when the EV is earthed. This second edition cancels and replaces the first edition published in 2001. It constitutes a technical revision. The main changes with respect to the first edition of this standard are:
- revision of connector definitions and current levels (Clause 8);
- modification definition of pilot wire to pilot function;
- division of Clause 9 to create Clauses 9 and 11;
- Clause 9: specific requirements for inlet, plug and socket-outlet;
- Clause 11: EVSE requirements: the basic generic requirements for charging stations;
- renumbering of annexes;
- deletion of previous Annex A and integration of charging cable requirements into new Clause 10;
- Annex B becomes Annex A and is normative for all systems using a PWM pilot function with a pilot wire; Annex C becomes Annex B;
- replacement of previous Annex D (coding tables for power indicator) with B.4 in Annex B using new values;
- new informative Annex C describing an alternative pilot function system.

This publication is of high relevance for Smart Grid."


Content Provider
International Electrotechnical Commission [iec]


Others Also Bought

IEC 61851-21 Ed. 1.0 b:2001
Electric vehicle conductive charging system - Part 21: Electric vehicle requirements for conductive connection ...
IEC 61851-22 Ed. 1.0 b:2001
Electric vehicle conductive charging system - Part 22: AC electric vehicle charging station
IEC 62196-2 Ed. 1.0 b:2011
"Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part ...
ANSI Logo

As the voice of the U.S. standards and conformity assessment system, the American National Standards Institute (ANSI) empowers its members and constituents to strengthen the U.S. marketplace position in the global economy while helping to assure the safety and health of consumers and the protection of the environment.

CUSTOMER SERVICE
NEW YORK OFFICE
ANSI HEADQUARTERS