Most recent
ISO 3070-3:2007
Machine tools - Test conditions for testing the accuracy of boring and milling machines with horizontal spindle - Part 3: Machines with movable column and movable table
ISO 3070-3:2007 specifies, with reference to ISO 230-1 and ISO 230-2, geometric tests, machining tests and tests for checking the accuracy and repeatability of positioning by numerical control of general purpose, normal accuracy, horizontal spindle boring and milling machines having a movable column and movable table. ISO 3070‑3:2007 also specifies the applicable tolerances corresponding to these tests.
ISO 3070-3:2007 concerns machines having movement of the column or column saddle on the bed (X axis), vertical movement of the spindle head (Y axis), movement of the boring spindle or ram (Z axis) and, possibly, a feed movement of radial facing slide in the facing head (U-axis). Some machines also have an intermediate saddle with slideway between column and bed to achieve additional movement of the column parallel to the spindle axis (W-axis).
ISO 3070-3:2007 deals only with the verification of the accuracy of the machine. It does not apply to the operational testing of the machine (e.g. vibration, abnormal noise, stick-slip motion of components) nor to machine characteristics (e.g. speeds, feeds), as such checks are generally carried out before testing the accuracy.
Content Provider
International Organization for Standardization [iso]
