Customer Service:
Mon - Fri: 8:30 am - 6 pm EST


SAE J 1470-2013 (SAE J1470-2013)

Measurement of Noise Emitted by Accelerating Highway Vehicles

This SAE Standard is equivalent to ISO Standard 362 - 1997 except for the differences detailed in Appendix A, and includes the modifications adopted by WP 29 in ECE R51 Revision 1 and EEC 92/97 and EEC 96/20. This document specifies an engineering method for measuring the noise emitted by accelerating highway vehicles of all types (except motorcycles) in intermediate gears with full utilization of the available engine power. The method is designed to meet the requirements of simplicity and reproducibility of results under realistic vehicle operating conditions. Measurements relate to operating conditions of the vehicle which give the highest noise level consistent with urban driving and which lead to reproducible noise emissions. Therefore, an acceleration test at full throttle from a stated engine or vehicle speed is specified. The test method calls for an acoustical environment which can only be obtained in an extensive open space. Such conditions can usually be provided for: a. Measurements at the manufacturing stage b. Measurements at official testing stations Measurements must be carried out in an acoustical environment which fulfill the requirements stated in this document. It should be noted that spot checking of vehicles chosen at random can rarely be made in an ideal acoustical environment. If measurements have to be carried out on the road in an acoustical environment which does not fulfill the requirements stated in this document, it should be recognized that the results obtained may deviate appreciably from the results obtained using the specified conditions. The results obtained by this method give an objective measure of the noise emitted under prescribed conditions of test. However, it is necessary to consider the fact that the subjective appraisal of the annoyance of different classes of motor vehicles is not simply related to the indications of a sound level meter. The motorcycles are covered in other SAE documents that prescribe an operating mode that is more representative of actual use.

Content Provider
Society of Automotive Engineers [sae]

Others Also Bought

Measurement of Minimum Noise Emitted by Road Vehicles
Document History
Included in Packages
This standard is not included in any packages.
Amendments & Corrections
We have no amendments or corrections for this standard.

As the voice of the U.S. standards and conformity assessment system, the American National Standards Institute (ANSI) empowers its members and constituents to strengthen the U.S. marketplace position in the global economy while helping to assure the safety and health of consumers and the protection of the environment.