Historical

SAE AMS 6350K-2006 (SAE AMS6350K-2006)

Steel Sheet, Strip, and Plate 0.95Cr 0.20Mo (0.28-0.33C) (SAE 4130)

This specification covers an aircraft-quality, low-alloy steel in the form of sheet, strip, and plate. These products have been used typically for use where welding and moderate tensile properties are required, but usage is not limited to such applications. Sheet and strip are extensively used where minimum tensile strength of 180 ksi (1241 MPa) is required in sections up to 0.125 inch (3.18 mm) in nominal thickness and proportionately lower strength is required in heavier thicknesses.

CONTENT PROVIDER
Society of Automotive Engineers [sae]

Others Also Bought
Heat Treatment of Carbon and Low-Alloy Steel Parts Minimum Tensile Strength Below 220 ksi (1517 MPa)
Brass, Free-Cutting Bars and Rods 61.5Cu 35Zn 3.1Pb Half Hard (H02) ( Reaffirmed: May 2008 )
Liquid Salt Bath Ferritic Nitrocarburizing Non-Cyanide Bath
Included in Packages
This standard is not included in any packages.
Document History
Amendments & Corrections
We have no amendments or corrections for this standard.