Historical

SAE AMS 6382M-2001 (SAE AMS6382M-2001)

Steel Bars, Forgings and Rings, 0.95Cr 0.20Mo (0.38-0.43C), Annealed ( Reaffirmed: Feb 2006 )


This specification covers an aircraft-quality, low-alloy steel in the form of bars, forgings, flash welded rings, and stock for forging or flash welded rings. These products have been used typically for parts, 0.50 inch (12.7 mm) and under in nominal section thickness at time of heat treatment, requiring a through-hardened steel capable of developing hardness as high as 50 HRC when properly hardened and for parts of greater thickness but requiring proportionally lower hardness, but usage is not limited to such applications. Certain design and processing procedures may cause these products to become susceptible to stress-corrosion cracking after heat treatment; ARP1110 recommends practices to minimize such conditions.


CONTENT PROVIDER
Society of Automotive Engineers [sae]

Document History
Included in Packages
This standard is not included in any packages.
Amendments & Corrections
We have no amendments or corrections for this standard.