Customer Service:
Mon - Fri: 8:30 am - 6 pm EST

Piping Conformity Assessment

Conformity Assessment Standards serve to provide a reference against which organizations can measure themselves as well as guiding third parties performing conformity assessment with a consistent and fair metric. The ISO/IEC 17000 series of standards is a broadly applicable conformity assessment guide that addresses impartiality, confidentiality, complaints and appeals, information disclosure, and the use of management systems, as well as a strong focus on requirements for bodies providing audit and certification of management systems. Conformity and certification of persons, products, processes, and services is a key element as well. Together, the ISO/IEC 17000 series of standards provides a thorough guide to conformity assessment for both those being assessed and those doing the assessing. These standards are related to conformity for piping. This includes topics such as Polyethylene of raised temperature resistance, Multilayer piping systems for hot and cold water installations inside buildings, Polypropylene (PP), and much more.

ISO/TS 22391-7:2018

Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 7: Guidance for the assessment of conformity

This document gives requirements and guidance for the assessment of conformity of materials, products, and assemblies in accordance with the applicable part(s) of ISO 22391 intended to be included in the manufacturer's quality plan as part of the quality management system and for the establishment of certification procedures. NOTE In order to help the reader, a basic test matrix is given in Annex A. In conjunction with the other parts of ISO 22391 (see Foreword), this document is applicable to polyethylene of raised temperature resistance (PE-RT) piping systems intended to be used for hot and cold water installations within buildings for the conveyance of water, whether or not intended for human consumption (domestic systems) and for heating systems, under design pressures and temperatures appropriate to the class of application (see ISO 22391-1:2009, Table 1).

Available for Subscriptions

ISO/TS 21003-7:2019

Multilayer piping systems for hot and cold water installations inside buildings - Part 7: Guidance for the assessment of conformity

This document gives requirements and guidance for the assessment of conformity of compounds, products, and assemblies in accordance with the applicable part(s) of ISO 21003 intended to be included in the manufacturer's quality plan as part of the quality management system and for the establishment of certification procedures. In conjunction with the other parts of ISO 21003 (see Foreword), this document is applicable to multilayer piping systems intended to be used for hot and cold water installations within buildings for the conveyance of water, whether or not intended for human consumption (domestic systems) and for heating systems, under design pressures and temperatures appropriate to the class of application (see ISO 21003-1:2008, Table 1).

Available for Subscriptions

ISO/TS 21003-7/Amd1:2010

Multilayer piping systems for hot and cold water installations inside buildings - Part 7: Guidance for the assessment of conformity - Anendment 1

Available for Subscriptions

ISO/TS 15874-7:2018

Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 7: Guidance for the assessment of conformity

This document gives requirements and guidance for the assessment of conformity of compounds, products, and assemblies in accordance with the applicable part(s) of ISO 15874 intended to be included in the manufacturer's quality plan as part of the quality management system and for the establishment of certification procedures. NOTE In order to help the reader, a basic test matrix is given in Annex A. In conjunction with the other parts of ISO 15874 (see Foreword), this document is applicable to polypropylene (PP) piping systems intended to be used for hot and cold water installations within buildings for the conveyance of water, whether or not intended for human consumption (domestic systems) and for heating systems, under design pressures and temperatures appropriate to the class of application (see ISO 15874-1:2013, Table 1).

Available for Subscriptions

ISO/TS 15875-7:2018

Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 7: Guidance for the assessment of conformity

This document gives requirements and guidance for the assessment of conformity of compounds, products, and assemblies in accordance with the applicable part(s) of ISO 15875 intended to be included in the manufacturer's quality plan as part of the quality management system and for the establishment of certification procedures. NOTE In order to help the reader, a basic test matrix is given in Annex A. In conjunction with the other parts of ISO 15875 (see Foreword), this document is applicable to crosslinked polyethylene (PE-X) piping systems intended to be used for hot and cold water installations within buildings for the conveyance of water, whether or not intended for human consumption (domestic systems) and for heating systems, under design pressures and temperatures appropriate to the class of application (see ISO 15875-1:2003, Table 1).

Available for Subscriptions

ISO/TS 15876-7:2018

Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 7: Guidance for the assessment of conformity

This document gives requirements and guidance for the assessment of conformity of compounds, products, and assemblies in accordance with the applicable part(s) of ISO 15876 intended to be included in the manufacturer's quality plan as part of the quality management system and for the establishment of certification procedures. NOTE In order to help the reader, a basic test matrix is given in Annex A. In conjunction with the other parts of ISO 15876 (see Foreword), this document is applicable to polybutene (PB) piping systems intended to be used for hot and cold water installations within buildings for the conveyance of water, whether or not intended for human consumption (domestic systems) and for heating systems, under design pressures and temperatures appropriate to the class of application (see ISO 15876-1:2017, Table 1).

Available for Subscriptions

ISO/TS 15877-7:2018

Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 7: Guidance for the assessment of conformity

This document gives requirements and guidance for the assessment of conformity of materials, products, and assemblies in accordance with the applicable part(s) of ISO 15877 intended to be included in the manufacturer's quality plan as part of the quality management system and for the establishment of certification procedures. NOTE In order to help the reader, a basic test matrix is given in Annex A. In conjunction with the other parts of ISO 15877 (see Foreword), this document is applicable to Chlorinated poly(vinyl chloride) (PVC-C) piping systems intended to be used for hot and cold water installations within buildings for the conveyance of water, whether or not intended for human consumption (domestic systems) and for heating systems, under design pressures and temperatures appropriate to the class of application (see ISO 15877-1:2009, Table 1).

Available for Subscriptions
ANSI Logo

As the voice of the U.S. standards and conformity assessment system, the American National Standards Institute (ANSI) empowers its members and constituents to strengthen the U.S. marketplace position in the global economy while helping to assure the safety and health of consumers and the protection of the environment.

Useful Links
CUSTOMER SERVICE
NEW YORK OFFICE
ANSI HEADQUARTERS
2024 © American National Standards Institute (ANSI) All Rights Reserved.