Best Selling Standards and Packages

RSS Feed

ANSI/ASQ Z1.4 and Z1.9 - Sampling Procedures and Tables Package

ANSI/ASQ Z1.4 and Z1.9 - Sampling Procedures and Tables Package

The ANSI/ASQ Z1.4 and Z1.9 - Sampling Procedures and Tables Package establishes sampling plans and procedures for inspection by variables and attributes for use in procurement, supply, storage and maintenance operations. Tables are also provided to guide in the process of measuring, examining and testing. This package includes ANSI/ASQ Z1.4 2003 (R2018) and ANSI/ASQ Z1.9 2003 (R2018).

ISO 14001:2026

Environmental management systems - Requirements with guidance for use

ISO 14001 specifies the requirements for an environmental management system that an organization can use to enhance its environmental performance. ISO 14001 is intended for use by an organization seeking to manage its environmental responsibilities in a systematic manner that contributes to the environmental pillar of sustainability. ISO 14001 helps an organization achieve the intended outcomes of its environmental management system, which provide value for the environment, the organization itself and interested parties. Consistent with the organization's environmental policy, the intended outcomes of an environmental management system include: · enhancement of environmental performance; · fulfillment of compliance obligations; · achievement of environmental objectives. ISO 14001 is applicable to any organization, regardless of size, type and nature, and applies to the environmental aspects of its activities, products and services that the organization determines it can either control or influence considering a life cycle perspective. ISO 14001 does not state specific environmental performance criteria. ISO 14001 can be used in whole or in part to systematically improve environmental management. Claims of conformity to ISO 14001, however, are not acceptable unless all its requirements are incorporated into an organization's environmental management system and fulfilled without exclusion.

AVAILABLE IN PACKAGES
AVAILABLE FOR SUBSCRIPTIONS

ISO 9001:2015

Quality management systems - Requirements

ISO 9001:2015 specifies requirements for a quality management system when an organization: a) needs to demonstrate its ability to consistently provide products and services that meet customer and applicable statutory and regulatory requirements, and b) aims to enhance customer satisfaction through the effective application of the system, including processes for improvement of the system and the assurance of conformity to customer and applicable statutory and regulatory requirements. All the requirements of ISO 9001:2015 are generic and are intended to be applicable to any organization, regardless of its type or size, or the products and services it provides. ISO 9001: Moving from ISO 9001-2008 to ISO 9001-2015 (Value Added Content)

AVAILABLE IN PACKAGES
AVAILABLE FOR SUBSCRIPTIONS

ANSI Z136.1 and Z136.9 Combination Set

Safe Use of Lasers and Safe Use of Lasers in Manufacturing Environments

Access recommendations for the safe use of lasers and laser systems in manufacturing environments which includes material processing, fabrication, laser alignment, leveling, inventory, metrology, and machine vision. The package is also supported with guidance on defining control measures for each of seven laser hazard classifications.

ANSI/IICRC S500 / ANSI/IICRC S520 / IICRC R520 - Water Damage and Mold Remediation Package

ANSI/IICRC S500 / ANSI/IICRC S520 / IICRC R520 - Water Damage and Mold Remediation Package

The ANSI/IICRC S500 / ANSI/IICRC S520 / IICRC R520 - Water Damage and Mold Remediation Package provides access to the procedures to be followed and the precautions to be taken when performing water damage restoration and mold remediation. The package is also supported with the IICRC R520 reference guide for mold remediation that summarizes most of the important procedures and methodologies of a mold remediation project.

ISO 19011:2026

Guidelines for auditing management systems

This document gives guidance on auditing management systems, including the principles of auditing, managing an audit programme and conducting management system audits, as well as guidance on the evaluation of competence of individuals involved in the audit process. These individuals include those managing the audit programme, auditors and audit teams. It is applicable to all organizations that need to plan and conduct audits of management systems or manage an audit programme. The application of this document to other types of audits is possible, provided that special consideration is given to the specific competence needed and the objectives to be achieved.

AVAILABLE IN PACKAGES
AVAILABLE FOR SUBSCRIPTIONS

ISO/FDIS 9001:2026

Quality management systems - Requirements

This document specifies requirements for a quality management system when an organization: a) needs to demonstrate its ability to consistently provide products and services that meet customer and applicable statutory and regulatory requirements, and b) aims to enhance customer satisfaction through the effective application of the system, including processes for improvement of the system and the assurance of conformity to customer and applicable statutory and regulatory requirements. All the requirements of this document are generic and are intended to be applicable to any organization, regardless of its type or size, or the products and services it provides.

AVAILABLE IN PACKAGES
AVAILABLE FOR SUBSCRIPTIONS

ANSI/SAIA A92.20 / ANSI/SAIA A92.22 / ANSI/SAIA A92.24 - Mobile Elevating Work Platforms Package

ANSI/SAIA A92.20 / ANSI/SAIA A92.22 / ANSI/SAIA A92.24 - Mobile Elevating Work Platforms Package

Access the design, calculations, stability criteria and construction of work platforms in the ANSI/SAIA A92.20 / ANSI/SAIA A92.22 / ANSI/SAIA A92.24 - Mobile Elevating Work Platforms Package. It also includes requirements for inspections, training, maintenance, repair and safe operation of mobile elevating work platforms.

ISO 13849 - Safety of Machinery Package

ISO 13849-1 and ISO 13849-2

The ISO 13849 - Safety of Machinery Package provides the safety requirements and guidance on the design and integration of safety related parts of control systems. It specifies the characteristics to identify the performance level required to for carrying out safety functions and can be applied to all kinds of safety related parts of control systems regardless of the technology and energy used. Procedures and conditions to be followed for validating safety functions and guidance for the interpretation of ISO 13849 -1 are also provided in the package. ISO 13849 - Safety of Machinery Package includes all parts of ISO 13849.

ANSI/ESD S20.20-2021

Protection of Electrical and Electronic Parts, Assemblies and Equipment (Excluding Electrically Initiated Explosive Devices)

This document applies to organizations that manufacture, process, assemble, install, package, label, service, test, inspect, transport, or otherwise handle electrical or electronic parts, assemblies, and equipment susceptible to damage by electrostatic discharges greater than or equal to 100 volts human body model (HBM) and 200 volts charged device model (CDM). Also, protection from isolated conductors is handled by limiting the voltage on isolated conductors to less than 35 volts.

ASTM E1444/E1444M-26

Standard Practice for Magnetic Particle Testing for Aerospace

1.1 This practice establishes minimum requirements for magnetic particle testing used for the detection of surface or slightly subsurface discontinuities in ferromagnetic material. This practice is intended for aerospace applications using the wet fluorescent method. Refer to Practice E3024/E3024M for industrial applications. Guide E709 can be used in conjunction with this practice as a tutorial. Note 1: This practice replaces MIL-STD-1949. 1.2 The magnetic particle testing method is used to detect cracks, laps, seams, inclusions, and other discontinuities on or near the surface of ferromagnetic materials. Magnetic particle testing may be applied to raw material, billets, finished and semi-finished materials, welds, and in-service parts. Magnetic particle testing is not applicable to non-ferromagnetic metals and alloys such as austenitic stainless steels. See Appendix X1 for additional information. 1.3 Portable battery powered electromagnetic yokes are outside the scope of this practice. 1.4 All areas of this practice may be open to agreement between the cognizant engineering organization and the supplier, or specific direction from the cognizant engineering organization. 1.5 This standard is a combined standard, an ASTM standard in which rationalized SI units and inch-pound units are included in the same standard, with each system of units to be regarded separately as standard. 1.5.1 Units— The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system are not necessarily exact equivalents; therefore, to ensure conformance with the standard, each system shall be used independently of the other, and values from the two systems shall not be combined. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

ANSI B11.0 / ANSI B11.19 / B11.TR3 Risk Assessment and Safeguarding of Machinery Package

ANSI B11.0 / ANSI B11.19 / B11.TR3 Risk Assessment And Safeguarding Of Machinery Package (Save 12% off List Prices)

ANSI B11.0 / ANSI B11.19 / B11.TR3 Risk Assessment and Safeguarding of Machinery Package provides the essential requirements to estimate, evaluate and reduce the risks associated with the use of machinery. It also provides the safety requirements and methods for guards, safeguarding devices and awareness devices. This package includes: ANSI B11.0-2023 B11.TR3-2000 (R2015) Historical Document ANSI B11.19-2019 (R2024)

ISO/IEC 42001 / ISO/IEC 42005 / ISO/IEC 42006 - Artificial Intelligence Package

ISO/IEC 42001 / ISO/IEC 42005 / ISO/IEC 42006 - Artificial Intelligence Package (Save 26% off List Prices)

Access the ISO/IEC 42001 / ISO/IEC 42005 / ISO/IEC 42006 - Artificial Intelligence Package for guidance on the development, implementation and management of an AI management system. It also includes guidance on the audit and certification of Artificial Intelligence Management Systems as well as risk management integration.

ANSI/ISEA Z358.1-2014 (R2020)

American National Standard for Emergency Eyewash and Shower Equipment

This standard establishes minimum performance and use requirements for eyewash and shower equipment for the emergency treatment of the eyes or body of a person who has been exposed to hazardous materials. It covers the following types of equipment: emergency showers, eyewashes, eye/face washes, and combination units. This standard also includes performance and use requirements for personal wash units and drench hoses, which are considered supplemental to emergency eyewash and shower equipment.

ANSI Z136.1-2022

American National Standard for Safe Use of Lasers

The ANSI Z136.1 for Safe Use of Lasers is the newly updated parent document and cornerstone of the Z136 series of laser safety standards. The Z136.1 is the foundation of laser safety programs for industrial, military, medical, and educational applications nationwide. These programs are also supported by industry-specific vertical standards within the Z136 series. The Z136.1 provides guidance for the safe use of lasers and laser systems that operate at wavelengths between 180 nm and 1000 m by defining control measures for each of the seven laser hazard classifications. This voluntary consensus standard is referenced by the United States Occupational Safety and Health Administration.

IPC A-610 / IPC/WHMA A-620 / IPC J-STD-001 - Electronic and Harness Assemblies Package

IPC A-610 / IPC/WHMA A-620 / IPC J-STD-001 - Electronic and Harness Assemblies Package

Access the IPC A-610 / IPC/WHMA A-620 / IPC J-STD-001 - Electronic and Harness Assemblies Package for guidance on the acceptance criteria for electronic assemblies. It also establishes a globally recognized criteria on soldering processes and materials as well as the related assembly activities associated with cable and harness assemblies.

ISO 13849 / IEC 60204-1 / IEC 62061 / ISO 12100 - Electrical Safety of Machinery Package

ISO 13849-1, ISO 13849-2, IEC 60204-1, IEC 62061, and ISO 12100 (Save 24% Off List Prices)

The ISO 13849 / IEC 60204-1 / IEC 62061 / ISO 12100 - Electrical Safety of Machinery Package provides general requirements for the design, risk assessment, and validation for the safety of machinery. ISO 13849 / IEC 60204-1 / IEC 62061 / ISO 12100 - Electrical Safety of Machinery Package also accounts for the functional safety of electronic and programmable electronic control systems. ISO 13849 / IEC 60204-1 / IEC 62061 / ISO 12100 - Electrical Safety of Machinery Package includes: ISO 13849-1:2023 ISO 13849-2:2012 IEC 60204-1 Ed. 6.0 b:2016 IEC 60204-1 Amd.1 Ed. 6.0 b:2021 IEC 62061 Ed. 2.0 b:2021 IEC 62061 Amd.1 Ed. 2.0 b:2024 IEC 62061 Amd.2 Ed. 2.0 b:2026 ISO 12100:2010

ANSI/ITSDF B56.1-2020

Safety Standard for Low Lift and High Lift Trucks

This Standard is one of a series that have been formulated with the Industrial Truck Standards Development Foundation as Sponsor in accordance with the Accredited Organization method, the procedures accredited by the American National Standards Institute, Inc., and the following scope: Establishment of the safety requirements relating to the elements of design, operation, and maintenance; standardization relating to principal dimensions to facilitate interchangeability, test methods, and test procedures of powered and nonpowered industrial trucks (not including vehicles intended primarily for earth moving or over-the-road hauling); and maintenance of liaison with the International Organization for Standardization (ISO) in all matters pertaining to powered and nonpowered industrial trucks.

ISO 9000:2026

Quality management - Fundamentals and vocabulary

This document establishes the fundamental concepts and principles of quality management which are universally applicable to the following: organizations seeking sustained success through the implementation of a quality management system (QMS); customers seeking confidence in an organization’s ability to consistently provide products and services conforming to their requirements; organizations seeking confidence in their supply chain that product and service requirements will be met; organizations and interested parties seeking to improve communication through a common understanding of the vocabulary used in quality management; organizations performing conformity assessments against the requirements of ISO 9001; providers of training, assessment or advice in quality management; developers of related standards. This document defines terms that apply to all quality management documents and QMS standards developed by ISO/TC 176. This document is applicable to all organizations, regardless of size, complexity or business model.

ANSI Z535 - Safety Collection

ANSI Z535 - Safety Collection

Access the ANSI Z535 - Safety Collection for guidance on a comprehensive system for the design, application, and use of safety signs, colors, symbols, labels, tags, and safety information in manuals or instructions. The ANSI Z535 - Safety Collection establishes a uniform approach to communicating hazards, helping to prevent accidents and promote workplace and public safety across all industries.

Useful Links

CUSTOMER SERVICE

Our Contacts

ANSI HEADQUARTERS
1899 L Street, NW, 11th Floor
Washington, DC 20036

Tel: 202.293.8020
Fax: 202.293.9287

NEW YORK OFFICE
1180 6th Ave, 10th floor
New York, NY 10036

Tel: 212. 642.4900
Fax: 212.398.0023