Customer Service:
Mon - Fri: 8:30 am - 6 pm EST


ANSI/ANS-2.27-2008 (R2016)

Criteria for Investigations of Nuclear Facility Sites for Seismic Hazard Assessments

This standard provides criteria and guidelines for conducting geological, seismological, and geotechnical investigations needed to provide information to support:- seismic source characterization input to a probabilistic seismic hazard analysis (PSHA);- evaluation of surface fault rupture hazard; - site response analysis; and- seismic-induced ground failure hazard.These criteria are applicable for SDC-3, SDC-4, and SDC-5 SSCs.This standard does not address the use of PSHA results or the selection of design basis events for nuclear facilities. These topics are covered in ANSI/ANS-2.26-2004 and ASCE/SEI 43-05, +óGé¼+ôSeismic Design Criteria for Structures, Systems, and Components.+óGé¼-¥ This standard is one of a series of national standards designed to provide criteria and guidelines to promote uniform and effective assessment of seismic hazards at nuclear facilities. These hazards must be properly identified and characterized commensurate with the level of risk and design requirements associated with each nuclear facility as specified in ANSI/ANS-2.26-2004, "Categorization of Nuclear Facility Structures, Systems and Components for Seismic Design", and ASCE/SEI 43-05 "Seismic Design Criteria for Structures, Systems and Components in Nuclear Facilities". As defined in ANSI/ANS-2.26-2004, a nuclear facility is a facility that stores, processes, tests, or fabricates radioactive materials in such form and quantity that a nuclear risk to the workers, to the off-site public, or to the environment may exist. These include, but are not limited to, nuclear fuel manufacturing facilities; nuclear material waste processing, storage, fabrication, and reprocessing facilities; uranium enrichment facilities; tritium production and handling facilities; radioactive materials laboratories. Additional criteria may be specified by the applicable regulatory authority.This standard outlines standard criteria and procedures to collect data needed as input to probabilistic analysis of seismic hazards at nuclear facilities as specified in ANSI/ANS-2.29-2008, "Probabilistic Seismic Hazards Analysis." Appropriate approaches are outlined to ensure that the current state-of-the-art methodology is being used in the site characterization. The selection of specific techniques and level of detail required to assess seismic and seismic-induced hazards is dependent on both the nature of the nuclear facility (i.e., Seismic Design Category (SDC) as defined by ANSI/ANS-2.26-2004 and site-specific conditions.

Content Provider
American National Standards Institute [ansi]


As the voice of the U.S. standards and conformity assessment system, the American National Standards Institute (ANSI) empowers its members and constituents to strengthen the U.S. marketplace position in the global economy while helping to assure the safety and health of consumers and the protection of the environment.