Most recent

ISO 13318-3:2004

Determination of particle size distribution by centrifugal liquid sedimentation methods - Part 3: Centrifugal X-ray method


ISO 13318-3:2004 describes a method for determining the particle size distributions of homogeneous particulate material using centrifugal sedimentation in a liquid. Solids concentrations are determined by the attenuation of an X-ray beam. The resulting signal enables conversion to a particle size distribution.

The method of determining the particle size distribution described in this standard is applicable to powders which can be dispersed in liquids or powders which are present in slurry form. The typical particle size range for analysis is from 0,1 m to 5 m. The method is applicable to powders in which all particles have the same effective density, chemical composition and comparable shapes. Materials possessing elements with an atomic number greater than about 12 can be expected to produce adequate X-ray opacity. Particles should not undergo chemical or physical change in the suspension liquid. It is necessary that the particles have a higher density than that of the liquid.


CONTENT PROVIDER
International Organization for Standardization [iso]

Others Also Bought
Determination of particle size distribution by centrifugal liquid sedimentation methods -- Part 1: General principles ...
Determination of particle size distribution by centrifugal liquid sedimentation methods - Part 2: Photocentrifuge ...
Included in Packages
This standard is not included in any packages.
Document History
We have no document history for this standard.
Amendments & Corrections
We have no amendments or corrections for this standard.