Most recent

ISO 16840-4:2009

Wheelchair seating - Part 4: Seating systems for use in motor vehicles


ISO 16840-4:2009 specifies test methods and requirements for design and performance, for instructions and warnings and for product marking and labelling of seating systems intended to be used as a forward-facing seat in a motor vehicle when fitted to a manual or powered wheelchair. It evaluates the frontal crashworthiness performance of complete seating systems for occupancy by adults or children of mass equal to or greater than 22 kg.

ISO 16840-4:2009 only applies to complete wheelchair seating systems including attachment hardware, designed to be used with a wheelchair base tested as part of a wheelchair system that conforms to ISO 7176-19 performance requirements and that has securement points for use with four-point, strap-type tiedowns.

ISO 16840-4:2009 applies to seating systems designed to be used with occupant restraints that anchor either to the vehicle, the tiedown system, the seating system or the wheelchair base.


CONTENT PROVIDER
International Organization for Standardization [iso]

Others Also Bought
Wheelchair seating - Part 3: Determination of static, impact and repetitive load strengths for postural support ...
Wheelchair seating - Part 6: Simulated use and determination of the changes in properties of seat cushions
Wheelchairs - Resistance to ignition of non-integrated seat and back support cushions - Part 10: Requirements and ...
Document History
We have no document history for this standard.
Included in Packages
This standard is not included in any packages.
Amendments & Corrections
We have no amendments or corrections for this standard.