Customer Service:
Mon - Fri: 8:30 am - 6 pm EST
Back
Standards PDF Cover Page

 Historical

ISO 5347-6:1993

Methods for the calibration of vibration and shock pick-ups - Part 6: Primary vibration calibration at low frequencies

Lays down detailed specifications for the instrumentation and procedure to be used for primary calibration of accelerometers at low frequencies. Applies to all kinds of pick-ups. Is applicable for a frequency range from 0,5 Hz to 20 Hz and a dynamic range from 1 m/s^2 to 200 m/s^2 (frequency-dependent) and from 0,5 mm to 1000 mm. The limits of uncertainty applicable are ± 0,5 % of reading.

Content Provider
International Organization for Standardization [iso]

Others Also Bought

ISO 5347-3:1993
Methods for the calibration of vibration and shock pick-ups - Part 3: Secondary vibration calibration
Call Customer Service
ISO 5347-4:1993
Methods for the calibration of vibration and shock pick-ups - Part 4: Secondary shock calibration
Call Customer Service
IEC 61315 Ed. 1.0 b:1995
Calibration of fibre optic power meters
Call Customer Service
Document History
We have no document history for this standard.
Included in Packages
This standard is not included in any packages.
Amendments & Corrections
We have no amendments or corrections for this standard.
ANSI Logo

As the voice of the U.S. standards and conformity assessment system, the American National Standards Institute (ANSI) empowers its members and constituents to strengthen the U.S. marketplace position in the global economy while helping to assure the safety and health of consumers and the protection of the environment.

Useful Links
CUSTOMER SERVICE
NEW YORK OFFICE
ANSI HEADQUARTERS
2024 © American National Standards Institute (ANSI) All Rights Reserved.