Customer Service:
Mon - Fri: 8:30 am - 6 pm EST

 Most recent

ISO/IEC 8802-2:1998

Information technology - Telecommunications and information exchange between systems - Local and metropolitan area networks - Specific requirements - Part 2: Logical link control

This International Standard is one of a set of international standards produced to facilitate the interconnec-tion of computer-s and terminais on a Local Area Network (LAN). It is related to the other international stan-dards by the Reference Mode1 for Open Systems Interconnection (OSI).

This International Standard describes the functions, features, protocol, and services of the Logical Link Con-trol (LLC) sublayer in the ISO/IEC 8802 LAN Protocol. The LLC sublayer constitutes the top sublayer in the data link layer (see figure 1) and is common to the various medium access methods that are defined and supported by the ISO/IEC 8802 activity. Separate International Standards describe each medium access method individually and indicate the additional features and functions that are provided by the Medium Access Control (MAC) sublayer in each case to complete the functionality of the data link layer as defined in the LAN architectural reference model.

This International Standard describes the LLC sublayer service specifications to the network layer (Layer 3), to the MAC sublayer, and to the LLC sublayer management function. The service specification to the net-work layer provides a description of the various services that the LLC sublayer, plus underlying layers and sublayers, offer to the network layer, as viewed from the network layer. The service specification to the MAC sublayer provides a description of the services that the LLC sublayer requires of the MAC sublayer. These services are defined SO as to be independent of the form of the medium access methodology, and of the nature of the medium itself. The service specification to the LLC sublayer management function provides a description of the management services that are provided to the LLC sublayer. Al1 of the above ser-vice specifications are given in the form of primitives that represent in an abstract way the logical exchange of information and control between thc LLC sublayer and the identified service function (network layer, MAC sublayer, or LLC sublayer management function). They do not specify or constrain the implementa-tion of entities or interfaces.

This International Standard provides a description of the peer-to-peer protocol procedures that are defined for the transfer of information and control between any pair of data link layer service access points on a LAN. The LLC procedures are independent of the type of medium access method used in the particular LAN.

To satisfy a broad range of potential applications, three types of data link control operation are included (see clause 4). The first type of operation (sec clause 6) provides a data-link-connectionless-mode service across a data link with minimum protocol complexity. This type of operation may be useful when higher layers pro-vide any essential recovery and sequencing services SO that these do not need replicating in the data link layer. In addition, this type of operation may prove useful in applications where it is not essential to guaran-tee the delivery of every data link layer data unit. This type of service is described in this International Stan-dard in terms of “logical data links.” The second type of operation (see clause 7) provides a data-link- connection-mode service across a data link comparable to existing data link control procedures provided in International Standards such as HDLC (see ISO/IEC 13239 : 1997'). This service includes support of sequenced delivery of data link layer data units, and a comprehensive set of data link layer errer recovery techniques. This second type of service is described in this International Standard in terms of “data link connections.” The third type of operation (see clause 8) provides an acknowledged-connectionless-mode data unit exchange service, which permits a station to both send data and request the return of data at the same time. Although the exchange service is connectionless, in-sequence delivery is guaranteed for data sent by the initiating station.

This International Standard identifies four distinct “classes” of LLC operation. Class 1 provides data-link-connectionless-mode service only. Class II provides data-link-connection-mode service plus data-link-con-nectionless-mode service. Class III provides acknowledged-connectionlcss-mode service plus data-link-con-nectionless-mode service. Class IV provides acknowledged-connectionless-mode service plus data-link-connection-mode service plus data-link-connectionless-mode service. Any one of these classes of operation may be supported.

The basic protocols described herein are peer protocols for use in multistation, multiaccess environments. Because of the multistation, multiaccess environment, it shall be possible for a station to be involved in a multiplicity of peer protocol data exchanges with a multiplicity of different stations over a multiplicity of different logical data links and/or data link connections that are carried by a single physical layer (PHY) over a single physical medium. Each unique to-from pairing at the data link layer shall define a separate logical data link or data link connection with separate logical parameters and variables. Except where noted, the procedures described shall relate to each data link layer logical data link or data link connection separately and independently from any other logical data link or data link connection that might exist at the stations involved.

ISO/IEC 10038 : 1993, annex C, provides additional services to allow the MAC service user the ability to determine and use multiple routes through a bridged LAN. This International Standard specifies the provi-sion for an optional Route Determination Entity (RDE) within the LLC sublayer. This entity provides for the discovery and selection of a path (bridged route) for each required data link through the bridged LAN. It does not preclude the LLC service user from providing its own method of discovery and selection of routes.

TO evaluate conformance of a particular implementation, it is necessary to have a statement of which capabilities and options have been implemented. Such a statement is called a Protocol Implementation Conformance Statement (PICS), as defined in ISO/IEC 9646-1 : 1994. This International Standard provides such a PICS proforma (Annex A) in compliance with the relevant requirements, and in accordance with the relevant guidance given in ISO/IEC 9646-2 : 1994.

Content Provider
International Organization for Standardization [iso]

Others Also Bought

Information technology - Telecommunications and information exchange between systems - High-level data link control ...
Integrated circuits - EMC evaluation of CAN transceivers
Road vehicles - Electrical disturbances from conduction and coupling - Part 3: Electrical transient transmission ...
Document History
We have no document history for this standard.
Included in Packages
This standard is not included in any packages.
Amendments & Corrections
Corrected By:

As the voice of the U.S. standards and conformity assessment system, the American National Standards Institute (ANSI) empowers its members and constituents to strengthen the U.S. marketplace position in the global economy while helping to assure the safety and health of consumers and the protection of the environment.