ANSI Webstore

Power Generation Standards

Whether you work with hydro, wind, thermal, or alternative power generation; power generators; low voltage or high voltage distribution; power distribution racks or cables; smart grid or ensuring workplace safety, the power industry has a strong focus on standardization and interoperability.

 Management
 EMC (Electromagnetic Compatibility)
 Equipment
 Fans
 Gas
 Geothermal
 High/Low Voltage
 Industrial
 Insulation
 Terminology
 Testing/Measurement
 Turbines

Management

ISO 50001:2011

Energy management systems - Requirements with guidance for use

ISO 50001 / ANSI/MSE 2000 / ISO 9000 / ISO 9001 - Energy and Quality Management Package

ISO 50001 / ANSI/MSE 2000 / ISO 9000 / ISO 9001 - Energy and Quality Management Package

ISO 50001 / ISO 9001 / ISO 14001 - Energy Quality and Environmental Management Systems Package

ISO 50001 / ISO 9001 / ISO 14001 - Energy Quality and Environmental Management Systems Package

ANSI/ASQC E1-1996

Quality Program Guidelines for Project Phase of Nonnuclear Power Generation Facilities

EMC (Electromagnetic Compatibility)

IEC 61000-2-4 Ed. 2.0 b:2002

Electromagnetic compatibility (EMC) - Part 2-4: Environment - Compatibility levels in industrial plants for low-frequency conducted disturbances

IEC 61000-6-1 Ed. 3.0 b:2016

Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity standard for residential, commercial and light-industrial environments

IEC 61000-6-3 Ed. 2.1 b:2011

"Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments"

IEC 61000-6-6 Ed. 1.0 b:2003

Electromagnetic compatibility (EMC) - Part 6-6: Generic standards - HEMP immunity for indoor equipment

Equipment

IEEE 277-2007

Recommended Practice for Cement Plant Power Distribution

IEEE 1250-2018

IEEE Guide for Identifying and Improving Voltage Quality in Power Systems

IEEE Std C93.5-1997

American National Standard Requirements for Single Function Power-Line Carrier Transmitter/Receiver Equipment

IEC 62382 Ed. 2.0 b:2012

Control systems in the process industry - Electrical and instrumentation loop check

DIN EN 45510-2-4:2001

Guide for procurement of power station equipment - Part 2-4: Electrical equipmen; High power static convertors; English version of DIN EN 45510-2-4 (FOREIGN STANDARD)

NECA/EGSA 404-2014

Standard for Installing Generator Sets

DIN EN 45510-2-3:2001

Guide for procurement of power station equipment - Part 2-3: Electrical equipment; Stationary batteries and chargers; English version of DIN EN 45510-2-3 (FOREIGN STANDARD)

DIN EN 45510-2-2:1999

Guide for procurement of power station equipment - Part 2-2: Electrical equipment - Uninterruptible power supplies (FOREIGN STANDARD)

AWS D14.6/D14.6M:2012

Specification for Welding of Rotating Elements of Equipment

ASTM D6224-16

Standard Practice for In-Service Monitoring of Lubricating Oil for Auxiliary Power Plant Equipment

Fans

AMCA 801-01 (R2008)

Industrial Process/Power Generation Fans: Specification Guidelines

AMCA 803-02 (R2008)

Industrial Process/Power Generation Fans: Site Performance Test Standard

Gas

AGA F22001

Impacts of Power Generation Gas Demand on Natural Gas Local Distribution Companies

AGA F69610

Existing and Future Electric Generation: Implications for Natural Gas

ISO 11365:2017

Petroleum and related products - Requirements and guidance for the maintenance of triaryl phosphate ester turbine control fluids

ASTM A986/A986M-01(2021)

Standard Specification for Magnetic Particle Examination of Continuous Grain Flow Crankshaft Forgings

Geothermal

ASTM E1675-20

Standard Practice for Sampling Two-Phase Geothermal Fluid for Purposes of Chemical Analysis

High/Low Voltage

IEEE C62.72-2016

IEEE Guide for the Application of Surge-Protective Devices for Use on the Load Side of Service Equipment in Low-Voltage (1000 V or Less, 50 Hz or 60 Hz) AC Power Circuits

IEC 61643-12 Ed. 3.0 b:2020

Low-voltage surge protective devices - Part 12: Surge protective devices connected to low-voltage power systems - Selection and application principles

IEC 61643-321 Ed. 1.0 b:2001

Components for low-voltage surge protective devices - Part 321: Specifications for avalanche breakdown diode (ABD)

Industrial

ISO/ASME 14414:2019

Pump system energy assessment

ISO 23570-3:2009

Industrial automation systems and integration - Distributed installation in industrial applications - Part 3: Power distribution bus

IEEE 141-1993 (R1999)

IEEE Recommended Practice for Electric Power Distribution for Industrial Plants

IEEE Std 493-2007

Recommended Practice for the Design of Reliable Industrial and Commercial Power Systems (Gold Book)

IEEE Std 3007.1-2010

IEEE Recommended Practice for the Operation and Management of Industrial and Commercial Power Systems

AMCA 850-02 (R2011)

Industrial Process/Power Generation Heavy Duty Dampers for Isolation and Control

SAE J 1939-75-2021

Application Layer - Generator Sets and Industrial

Insulation

IEEE 386-2016

IEEE Standard for Separable Insulated Connector Systems for Power Distribution Systems Rated 2.5 kV through 35 kV

IEC 60811-401 Ed. 1.0 b:2012

Electric and optical fibre cables - Test methods for non-metallic materials - Part 401: Miscellaneous tests - Thermal ageing methods - Ageing in an air oven

IEC 60811-402 Ed. 1.0 b:2012

Electric and optical fibre cables - Test methods for non-metallic materials - Part 402: Miscellaneous tests - Water absorption tests

IEC 60811-403 Ed. 1.0 b:2012

Electric and optical fibre cables - Test methods for non-metallic materials - Part 403: Miscellaneous tests - Ozone resistance test on cross-linked compounds

IEC 60811-404 Ed. 1.0 b:2012

Electric and optical fibre cables - Test methods for non-metallic materials - Part 404: Miscellaneous tests - Mineral oil immersion tests for sheaths

IEC 60811-405 Ed. 1.0 b:2012

Electric and optical fibre cables - Test methods for non-metallic materials - Part 405: Miscellaneous tests - Thermal stability test for PVC insulations and PVC sheaths

IEC 60811-406 Ed. 1.0 b:2012

Electric and optical fibre cables - Test methods for non-metallic materials - Part 406: Miscellaneous tests - Resistance to stress cracking of polyethylene and polypropylene compounds

IEC 60811-408 Ed. 1.0 b:2012

Electric and optical fibre cables - Test methods for non-metallic materials - Part 408: Miscellaneous tests - Long-term stability test of polyethylene and polypropylene compounds

IEC 60811-409 Ed. 1.0 b:2012

Electric and optical fibre cables - Test methods for non-metallic materials - Part 409: Miscellaneous tests - Loss of mass test for thermoplastic insulations and sheaths

IEC 60811-410 Ed. 1.0 b:2012

Electric and optical fibre cables - Test methods for non-metallic materials - Part 410: Miscellaneous tests - Test method for copper-catalyzed oxidative degradation of polyolefin insulated conductors

IEC 60811-411 Ed. 1.0 b:2012

Electric and optical fibre cables - Test methods for non-metallic materials - Part 411: Miscellaneous tests - Low-temperature brittleness of filling compounds

IEC 60811-412 Ed. 1.0 b:2012

Electric and optical fibre cables - Test methods for non-metallic materials - Part 412: Miscellaneous tests - Thermal ageing methods - Ageing in an air bomb

Terminology

ASTM D4538-21

Standard Terminology Relating to Protective Coating and Lining Work for Power Generation Facilities

IEC 60027-7 Ed. 1.0 b:2010

"Letter symbols to be used in electrical technology - Part 7: Power generation, transmission and distribution "

Testing/Measurement

IEEE 1366-2012

IEEE Guide for Electric Power Distribution Reliability Indices

IEEE 1515-2000 (R2008)

IEEE Recommended Practice for Electronic Power Subsystems: Parameter Definitions, Test Conditions, and Test Methods

IEEE Std 1656-2010

IEEE Guide for Testing the Electrical, Mechanical, and Durability Performance of Wildlife Protective Devices on Overhead Power Distribution Systems Rated up to 38 kV

IEC 62129-1 Ed. 1.0 b:2016

Calibration of wavelength/optical frequency measurement instruments - Part 1: Optical spectrum analyzers

SAE J 1752-2-2016 (SAE J1752-2-2016)

Measurement of Radiated Emissions from Integrated CircuitsΓÇöSurface Scan Method (Loop Probe Method) 10 MHz to 3 GHz (Stabilized: Sep 2016)

ASTM E2022-16(2021)

Standard Practice for Calculation of Weighting Factors for Tristimulus Integration

ASTM G178-16

Standard Practice for Determining the Activation Spectrum of a Material (Wavelength Sensitivity to an Exposure Source) Using the Sharp Cut-On Filter or Spectrographic Technique

IEC/TS 61967-3 Ed. 2.0 b:2014

Integrated circuits - Measurement of electromagnetic emissions - Part 3: Measurement of radiated emissions - Surface scan method

AMCA 802-19

Industrial Process/Power Generation Fans: Establishing Performance Using Laboratory Models

ISO 16587:2004

Mechanical vibration and shock - Performance parameters for condition monitoring of structures

ASTM D5463-18

Standard Guide for Use of Test Kits to Measure Inorganic Constituents in Water

Turbines

ISO 8068:2006

Lubricants, industrial oils and related products (class L) - Family T (Turbines) - Specification for lubricating oils for turbines

ASME TDP-1-2013

Prevention of Water Damage to Steam Turbines Used for Electric Power Generation: Fossil-Fueled Plants

EA-3-2009(R2014)

Energy Assessment for Steam Systems

ASTM D4378-20

Standard Practice for In-Service Monitoring of Mineral Turbine Oils for Steam, Gas, and Combined Cycle Turbines

Useful Links

CUSTOMER SERVICE

Our Contacts

ANSI HEADQUARTERS
Washington, DC
1899 L Street, NW, 11th Floor
Washington, DC 20036

Tel: 202.293.8020
Fax: 202.293.9287

NEW YORK OFFICE
New York, NY
25 West 43rd Street, 4th floor
New York, NY 10036

Tel: 212. 642.4900
Fax: 212.398.0023