Customer Service:
Mon - Fri: 8:30 am - 6 pm EST

Other Packages

Access an array of standards packages that includes collections for the disinfection of water in treatment facilities, consumer product safety guidance, storage of natural gas and petroleum, liquids and gases small bore connectors, and many more. Download collections from BSI, ASME, AWWA, and ISO.

 Back to Standards Packages Home

ANSI/ASA S1.4 / IEC 61672 - Electroacoustics Sound Level Meters Package

ANSI/ASA S1.4 / IEC 61672 - Electroacoustics Sound Level Meters Package

Access this package of ASA electroacoustics sound level meters standards that provides specifications for time-weighting sound level meter, integrating averaging sound level meter and integrating sound level meter. The ANSI/ASA S1.4 / IEC 61672 - Electroacoustics Sound Level Meters Package also provides specifications for periodic and pattern evaluation testing.


ANSI/SAIA A92 - Elevating Platforms Collection

ANSI/SAIA A92 - Elevating Platforms Collection

Access the SAIA A92 comprehensive collection of elevating platforms standards for self-propelled, vehicle mounted, mobile work platforms and more.



ASTM Small Unmanned Aircraft Systems Package - Operational Safety

ASTM Small Unmanned Aircraft Systems Package - Operational Safety

Access this ASTM collection of small unmanned aircraft system standards that help to establish operational safety specifications. The operational and safety specifications specifically provides guidance for assessing impacts, parachutes, and beyond visual line of sight approvals. The package is also supported with a manual for general maintenance of SUAS.


ASTM Unmanned Aircraft System Collection

ASTM Unmanned Aircraft System Collection

Access the comprehensive ASTM Unmanned Aircraft System Collection that provides a foundation for implementing various practices and guidelines. This collection is applicable to audits, training, flight manuals, detect and avoid systems, and much more.


Cell Therapy Standards Addressing Product Quality And Characterization Package

Cell Therapy Standards Addressing Product Quality And Characterization Package

Access this comprehensive collection of cell therapy standards addressing product quality and characterization. Associated standards pending development are:
STM WK59216
ISO/CD 23511
ISO/AWI TS 23565
ISO/DIS 23033


ISO 8601 - Date and Time Information Interchange Package

Date and time - Representations for information interchange - Part 1: Basic rules

The ISO 8601 package specifies representations of dates of the Gregorian calendar and times based on the 24-hour clock, as well as composite elements of them, as character strings for use in information interchange. It is also applicable for representing times and time shifts based on Coordinated Universal Time (UTC).


IEC 62368 - Audio/Video Information and Communication Technology Equipment Package

IEC 62368 - Audio/Video Information and Communication Technology Equipment Package (Save 32% off List Prices)

Access the safety requirements for electrical and electronic equipment within the field of audio, video, information, and communication technology in the IEC 62368 - Audio/Video Information and Communication Technology Equipment Package.


ISO 11929 - Determination Of The Characteristic Limits Package

ISO 11929 - Determination Of The Characteristic Limits Package - Parts 1 to 4 (Save 50% off List Prices)

The ISO 11929 series of standards specifies a procedure, in the field of ionizing radiation metrology, for the calculation of the "decision threshold", the "detection limit" and the "limits of the coverage interval" for a non-negative ionizing radiation measure and when counting measurements with preselection of time or counts are carried out.


ISO 12944 – Corrosion Protection of Steel By Protective Paint Collection

ISO 12944 – Corrosion Protection of Steel By Protective Paint Collection (Save 35% off List Prices)

Access this comprehensive collection of corrosion protection of steel standards as it pertains to protective paint systems. From start to finish of your steel project the ISO 12944 – Corrosion Protection of Steel By Protective Paint Collection provides guidance on classification of environments, design, surface preparation, laboratory performance test methods, maintenance and more.


ISO 1496 - Series 1 Freight Containers Package

ISO 1496 - Series 1 Freight Containers Package - Parts 1 to 5 (Save 53% off List Prices)

Access the complete collection of ISO standards for series 1 freight containers. This package provides specification and testing guidance for general cargo containers as well as thermal containers and containers for liquids, gases, and dry bulk.


ISO 21501 - Particle Size Distribution Package

ISO 21501 - Particle Size Distribution Package Parts 1 to 4 (Save 35% off List Prices)

Use the ISO 21501 - Particle Size Distribution Package to access various single particle light interaction methods. The methods address light scattering aerosol spectrometers, liquid-borne particle counters, and airborne particle counters.


ISO Space Systems Debris Package

ISO 24113, ISO 27852, ISO 27875, ISO/TR 16158, ISO 16126, and ISO/DIS 20893 (Save 40% off List Prices)

Access the necessary requirements, procedures, and techniques that are applicable to various aspects of space debris mitigation using the ISO Space Systems Debris Package.


ISO Space Systems Collection - Debris

ISO 24113, ISO 27852, ISO 27875, ISO/TR 16158, ISO 16126, ISO 11227, ISO 14200, ISO/TR 18146, ISO/TR 20590 And ISO 20893 (Save 40% off List Prices)

Access a core collection of standards that are applicable to various aspects of space systems including space debris mitigation, re-entry risk management, avoiding collisions, as well as test procedures for hypervelocity impact. The ISO Space Systems Collection - Debris is fundamental in addressing debris mitigation.


ISO 4037 - Radiological Protection Package

ISO 4037 - Radiological Protection Package

Access the ISO 4037 collection that provides the procedure specifications for X And gamma reference radiation for calibrating dose meters and dose rate meters.


ISO 9809 - Gas Cylinders Package

ISO 9809 - Gas Cylinders Package - Parts 1 to 4 (Save 38% off List Prices)

Access the necessary requirements for the material, design, construction and workmanship, manufacturing processes, examination and testing for refillable seamless steel gas cylinders and tubes.


ISO/IEC 7816 - Identification Cards Package

ISO/IEC 7816 - Identification Cards Package - Parts 1 to 15 (Save 60% off List Prices)

Access all of the necessary standards for identification cards as it pertains to integrated circuit cards with the ISO/IEC 7816 - Identification Cards Package. This package provides guidance on physical characteristics, electrical interface, transmission protocols, structured card query language, card management commands, and much more.


NFSI B101. - Walkway Collection

NFSI B101. - Walkway Collection

Access this National Floor Safety Institute's comprehensive collection of walkway standards that provides guidance on an array of walkway procedures. These standards establish the foundation for audits, safety management, trip hazards, and more.


Tissue Engineering Standards Addressing Analytical and Testing Methodologies Package

Tissue Engineering Standards Addressing Analytical and Testing Methodologies Package

Access guidance standards needed for addressing analytical and testing methodologies for tissue engineering. Associated standards pending development are:
ISO/ TR 3985
ISO/CD 20397-1
ISO/WD 20688-2
ISO/DIS 23033
ISO/WD 24190
ISO/AWI TS 24420
ISO/CD 24421
ASTM WK72274
ASTM WK74668
ISO/AWI TS 24560-1
ASTM WK51697
ASTM WK55364
ASTM WK57514
ASTM WK62115
ASTM WK65476


Tissue Engineering Standards Addressing Product Quality and Characterization Package

Tissue Engineering Standards Addressing Product Quality and Characterization Package

Access this comprehensive collection of product quality and characterization tissue engineering standards. Associated standards pending development are:
ISO/DIS 23033
ISO/CD 23511
ISO/WD 24190
ASTM WK17329
ASTM WK51697
ASTM WK59216
ASTM WK62115
ASTM WK65476
ISO 20391-2:2019
ISO/AWI TS 23565


ANSI Z80.3-2018 and ANSI Z80.3-2015 - Ophthalmics Transition Set

ANSI Z80.3-2018 and ANSI Z80.3-2015 - Ophthalmics Transition Set

Use the ANSI Z80.3-2018 and ANSI Z80.3-2015 - Ophthalmics Transition Set to access the requirements for nonprescription sunglasses and fashion eyewear. The ANSI Z80.3 requirements include specifications for impact resistance, flammability, frame finish, frame corrosion, and much more. ANSI Z80.3-2018 and ANSI Z80.3-2015 - Ophthalmics Transition Set includes the 2018 version of ANSI Z80.3 as well as the 2015 version to provide an easy transition to the new version and also to track the changes in each version. Some changes include testing of photosensitive lenses, prism power, and tolerances. ANSI Z80.3-2018 and ANSI Z80.3-2015 - Ophthalmics Transition Set includes:
ANSI Z80.3-2018
ANSI Z80.3-2015


ANSI Z80.3 / ANSI/ISEA Z87.1 - Eyewear Requirements Set

ANSI Z80.3 / ANSI/ISEA Z87.1 - Eyewear Requirements Set

Use ANSI Z80.3 / ANSI/ISEA Z87.1 - Eyewear Requirements Set to establish the requirements and guidelines for the most durable, and safe eyewear for occupational, educational, or fashion purposes. The ANSI Z80.3 / ANSI/ISEA Z87.1 - Eyewear Requirements Set includes:
ANSI Z80.3-2018
ANSI/ISEA Z87.1-2015
 


ANSI/ISEA Z87.1 / ANSI Z80.3 / ANSI Z80.1 - Eyewear Package

ANSI Z80.3-2018, ANSI/ISEA Z87.1-2015, and ANSI Z80.1-2015

The trifecta of eye protection standards, ANSI/ISEA Z87.1 / ANSI Z80.3 / ANSI Z80.1 - Eyewear Package establishes the recommendations to achieve the highest compliance for prescription and non-prescription ophthalmic lenses in occupational, educational, and personal environments. The ANSI/ISEA Z87.1 / ANSI Z80.3 / ANSI Z80.1 - Eyewear Package includes:
ANSI Z80.3-2018
ANSI/ISEA Z87.1-2015
ANSI Z80.1-2015


ISO/IEC 14443 - Personal Identification Proximity Cards Package

ISO/IEC 14443-1:2018, ISO/IEC 14443-2:2016, ISO/IEC 14443-3:2018, and ISO/IEC 14443-4:2018

ISO/IEC 14443 - Personal Identification Proximity Cards Package provides the requirements for contactless proximity objects and cards. The ISO/IEC 14443 series offers recommendations for the physical characteristics, radio frequency fields for power and communication, protocol commands, and more for contactless proximity devices. The ISO/IEC 14443 - Personal Identification Proximity Cards Package includes:
ISO/IEC 14443-1:2018
ISO/IEC 14443-2:2016
ISO/IEC 14443-3:2018
ISO/IEC 14443-4:2018


ISO 16128 - Natural and Organic Cosmetics Set

ISO 16128 - Natural and Organic Cosmetics Set

Use ISO 16128 to access technical guidelines for establishing the definitions and criteria of natural and organic ingredients used in cosmetics. Also learn the approach to determine natural, natural origin, organic, and organic origin indexes for cosmetic ingredients and products. ISO 16128 - Natural and Organic Cosmetics Set includes:
ISO 16128-1:2016
ISO 16128-2:2017


ANSI/BHMA A156.10 / ANSI/BHMA A156.19 - Power Operated Doors Set

ANSI/BHMA A156.19 and ANSI/BHMA A156.10

ANSI/BHMA A156.10 / ANSI/BHMA A156.19 - Power Operated Doors Set provides the requirements for power operated, power assist and low energy doors. Mostly applicable to automatic pedestrian doors as well as swing door operators, this set includes provisions to reduce the chance of user injury or entrapment. The ANSI/BHMA A156.10 / ANSI/BHMA A156.19 - Power Operated Doors Set includes:
ANSI/BHMA A156.10-2017
ANSI/BHMA A156.19-2013


ISO 6887 - Microbiology of the Food Chain Package

Parts 1 to 4: ISO 6887-1, ISO 6887-2, ISO 6887-3 and ISO 6887-4

ISO 6887 - Microbiology of the Food Chain Package provides the methods for testing, suspension, and decimal dilutions for the microbiological examination of meat and meat products, fish and fish products, and various other miscellaneous products. ISO 6887 - Microbiology of the Food Chain Package includes:
ISO 6887-1:2017
ISO 6887-2:2017
ISO 6887-3:2017
ISO 6887-4:2017


ISO 80369 - Liquids and Gases Small Bore Connectors Package

ISO 80369-1, ISO 80369-3, ISO 80369-6, ISO 80369-7 and ISO 80369-20

ISO 80369 - Liquids and Gases Small Bore Connectors Package provides the requirements for liquids and gases small-bore connectors. It specifically addresses connectors for enteral, neuraxial, and intravascular applications. ISO 80369 - Liquids and Gases Small Bore Connectors Package is also supported with common test methods and it includes:
ISO 80369-1:2010
ISO 80369-3:2016
ISO 80369-6:2016
ISO 80369-7:2016
ISO 80369-20:2015


ISO 25947 - Fireworks Collection

ISO 25947-1, ISO 25947-2, ISO 25947-3, ISO 25947-4 and ISO 25947-5

ISO 25947 - Fireworks Collection establishes the categorical definitions for fireworks which range from noise levels to hazard levels. The ISO 25947 - Fireworks Collection establishes the requirements for testing, construction, performance, and labeling of fireworks. While there are four fireworks categories, the ISO 25947 - Fireworks Collection is only applicable to categories 1, 2, and 3 and it includes:
ISO 25947-1:2017
ISO 25947-2:2017
ISO 25947-3:2017
ISO 25947-4:2017
ISO 25947-5:2017


ISO/IEC 7812 - Identification Cards Package

ISO/IEC 7812-1 and ISO/IEC 7812-2

The ISO/IEC 7812 - Identification Cards Package provides the necessary requirements to assist issuers of cards in establishing the Issuer Identification Number (IIN) which is needed by issuers of identification cards used in international, inter-industry and/or intra-industry interchange. ISO/IEC 7812 - Identification Cards Package specifies the numbering system as well as the application and registration procedures. ISO/IEC 7812 - Identification Cards Package includes:
ISO/IEC 7812-1:2017
ISO/IEC 7812-2:2017


ISO 15156 - Petroleum and Natural Gas Package

ISO 15156-1, ISO 15156-2 and ISO 15156-3

ISO 15156 - Petroleum and Natural Gas Package provides guidance on the selection and service of materials used to store natural gas and petroleum to avoid corrosion damage and other health and safety risk associated with gas and oil equipment. The ISO 15156 - Petroleum and Natural Gas Package addresses the carbon and low-alloy steels, cast irons and other corrosion-resistant alloys for resistance and damage that can be caused by sulfide stress-cracking (SSC), stress-corrosion cracking (SCC) and galvanically induced hydrogen stress cracking (GHSC). ISO 15156 - Petroleum and Natural Gas Package includes:
ISO 15156-1:2015
ISO 15156-2:2015
ISO 15156-3:2015


AWWA D100 / AWWA D102 / AWWA D103 - Steel Water Storage Tanks Package

AWWA D100, AWWA D102 and AWWA D103 - Carbon Steel Water Storage Tanks Standards

AWWA D100 / AWWA D102 / AWWA D103 - Steel Water Storage Tanks Package supports the requirements for the design, construction, inspection, and testing of welded carbon steel, bolted carbon steel and the coating of steel water storage tanks. Water tanks that are built according to the suggested requirements in the AWWA D100 / AWWA D102 / AWWA D103 - Steel Water Storage Tanks Package and are properly operated and maintained can potentially have an unlimited service life. AWWA D100 / AWWA D102 / AWWA D103 - Steel Water Storage Tanks Package includes:  
AWWA D100-11 - Welded Carbon Steel Tanks
 
AWWA D102-2017 - Coating Steel Water Storage Tanks
 
AWWA D103-09 - Factory-Coated Bolted Carbon Steel Tanks


AWWA C651 / AWWA C652 / AWWA C653 - Disinfection Of Water Package

AWWA C651, AWWA C652 and AWWA C653 Collection of Disinfection Of Water Standards

AWWA C651 / AWWA C652 / AWWA C653 - Disinfection Of Water Package is applicable to new and existing water treatment facilities and provides suggested chlorination materials, procedures, and requirements for the disinfection of water treatment facilities. AWWA C651 / AWWA C652 / AWWA C653 - Disinfection Of Water Package supports the treatment of water mains, water storage facilities and also water treatment plants. AWWA C651 / AWWA C652 / AWWA C653 - Disinfection Of Water Package includes:  
AWWA C651-2014 - Disinfecting Water Mains
 
AWWA C652-11 - Disinfection Of Water Storage Facilities
 
AWWA C653-2013 - Disinfection Of Water Treatment Plants


ISO Collection - Freight Containers

ISO 668, ISO 830, ISO 1496, ISO 6346, ISO 10368, ISO 17712 and many more...

ISO Collection - Freight Containers is a comprehensive collection of standards that are applicable to various aspects of freight containers. ISO Collection - Freight Containers provides specifications for general cargo, thermal containers, liquid/gases tank containers, as well as non-pressurized containers. In addition, ISO Collection - Freight Containers also addresses the handling and securing of freight containers, mechanical seals and shipment tagging systems. The ISO Collection - Freight Containers contains over 20 standards and it is discounted 80% off the individual list prices:
ISO 1496-1:2013
ISO 1496-1:2013/Amd 1:2016
ISO 1496-2:2008
ISO 1496-3:1995
ISO 1496-3/Amd1:2006
ISO 1496-4:1991
ISO 1496-4/AMD1:1994
ISO 1496-4/Cor1:2006
ISO 1496-5:1991
ISO 1496-5/AMD1:1993
ISO 1496-5/AMD2:1994
ISO 18185-1:2007
ISO 18185-2:2007
ISO 18185-3:2015
ISO 18185-4:2007
ISO 18185-5:2007
ISO 3874:2017
ISO/TR 15070:1996
ISO/TR 15070/Amd1:2005
ISO/TR 15070/Amd2:2007
ISO 668:2013
ISO 668:2013/Amd1:2016
ISO 668:2013/Amd2:2016
ISO 830:1999
ISO 830/Cor1:2001
ISO 6346:1995
ISO 6346:1995/Amd3:2012
ISO 9669:1990
ISO 9669/AMD1:1992
ISO 9711-1:1990
ISO 9897:1997
ISO 9897/Cor1:2001
ISO 10368:2006
ISO/TR 15069:1997
ISO 1161:2016
ISO 18186:2011
ISO 14829:2002
ISO 17712:2013
ISO/TS 10891:2009
ISO/TS 10891/Cor1:2009


ISO 3166 - Country Codes Collection

ISO 3166-1, ISO 3166-2 and ISO 3166-3

The ISO 3166 - Country Codes Collection establishes a universally applicable code for the representation of the names of principal administrative divisions of countries and territories and is intended for use in any application requiring the expression of current country names in coded form. ISO 3166 - Country Codes Collection is also applicable to subdivisions of countries and geopolitical entities and it provides principles and maintenance arrangements of code for removed country names as well. The ISO 3166 - Country Codes Collection includes:
ISO 3166-1:2013
ISO 3166-2:2013
ISO 3166-3:2013


ANSI Z535.3 / ANSI Z535.4 / ANSI Z535.6 - Product Safety Package

ANSI Z535.3 / ANSI Z535.4 / ANSI Z535.6 - Product Safety Package

ANSI/NEMA Z535.3 / ANSI/NEMA Z535.4 / ANSI/NEMA Z535.6 - Product Safety Package provides the requirements for the design, use, and placement of safety signs on various products. The ANSI/NEMA Z535.3 / ANSI/NEMA Z535.4 / ANSI/NEMA Z535.6 - Product Safety Package seeks to enable safety and accident prevention information through product safety signs and labels. The package is also supported by the criteria for safety symbols which address specific hazards and suggestions on avoiding personal injury. ANSI/NEMA Z535.3 / ANSI/NEMA Z535.4 / ANSI/NEMA Z535.6 - Product Safety Package includes:

 
     
  • ANSI Z535.3-2011 (R2017)
  •  
  • ANSI Z535.4-2011 (R2017)
  •  
  • ANSI Z535.6-2011 (R2017)
  •  


ISO 3864 - Graphical Symbols Package

ISO 3864-1, ISO 3864-2, ISO 3864-3 and ISO 3864-4

The Graphical Symbols - Safety Colours and Safety Signs Package provides the users with the design principles for product safety labels, safety signs in work / public places and graphical symbols for use in safety signs. The package also identifies the purpose, colors, hazard severity panel, signal words, types / layout of product safety labels and safety signs plus so much more. This collection contains the following ISO documents: ISO 3864-1:2011, ISO 3864-2:2016, ISO 3864-3:2012 and ISO 3864-4:2011. This package is reduced 20% off the individual list price.


ANSI/ASME B1.1 / ANSI/ASME B1.2 / ANSI/ASME B1.20.1 - Unified Screw and Pipe Threads Package

ANSI/ASME B1.1, ANSI/ASME B1.2 and ANSI/ASME B1.20.1

The ANSI/ASME B1.1 / ANSI/ASME B1.2 / ANSI/ASME B1.20.1 - Unified Screw and Pipe Threads Package provides the specifications and gages for unified screw threads and pipe threads. It also specifically specifies the thread form, allowance, tolerance, and designation for unified screw threads. The ANSI/ASME B1.1 / ANSI/ASME B1.2 / ANSI/ASME B1.20.1 - Unified Screw and Pipe Threads Package includes:

 
     
  • ANSI/ASME B1.1-2003 (R2008)
  •  
  • ANSI/ASME B1.2-1983 (R2017)
  •  
  • ASME B1.20.1-2013
  •  


ASME B46.1 / ANSI/ASME B1.2 - Surface Texture and Gaging for Screw Threads Package

ASME B46.1 and ANSI/ASME B1.2

The ASME B46.1 / ANSI/ASME B1.2 - Surface Texture and Gaging for Screw Threads Package provides the surface texture, gaging, and dimension specifications for unified screw threads. It specifically supports surfacesproduced by means such as abrading, casting, coating, cutting, etching, sintering and more. The ASME B46.1 / ANSI/ASME B1.2 - Surface Texture and Gaging for Screw Threads Package includes:

  • ASME B46.1-2009
  • ANSI/ASME B1.2-1983 (R2017)


ISO/IEC 15415 / ISO/IEC 15416 Automatic Identification and Data Capture Techniques Package

ISO/IEC 15415 / ISO/IEC 15416 Automatic Identification and Data Capture Techniques Package

The ISO/IEC 15415 / ISO/IEC 15416 Automatic Identification and Data Capture Techniques Package provides the bar code print quality test specifications for linear symbols and two dimensional symbols. It also specifies methodologies for the measurement of multi-row bar code symbols and two-dimensional matrix symbols. The ISO/IEC 15415 / ISO/IEC 15416 Automatic Identification and Data Capture Techniques Package includes:
ISO/IEC 15415:2011
ISO/IEC 15416:2016


BS 9000 Electronic Components Package

BS 9000 Electronic Components Package (Assessed Quality System) (British Standard)

The BS 9000 Electronic Components Assessed Quality System Package specifies the general procedures for the BS 9000 system for the specification, qualification or capability approval, inspection and release of electronic components of assessed quality. The specifications in this package are applicable to lot formation, release procedures, certified test records, approval procedures and conformance testing. The system for the assessed quality of electronic components is based on the national implementation of the CENELEC Electronic Components Committee (System for Europe) and IECQ system. This package includes: BS 9000-1:1989, BS 9000-2:1996, BS 9000-3:1996, BS 9000-5:1989, BS 9000-6:1989 and BS 9000-7:1989.


ISO 898 - Mechanical Properties of Fasteners Package

ISO 898 - Mechanical Properties of Fasteners Package

The ISO 898 - Mechanical Properties of Fasteners Package specifies the mechanical and physical properties of carbon and alloy steel bolts, screws, nuts and studs. This package is applicable to bolts, screws, nuts and studs with triangular ISO metric screw thread, coarse pitch thread, 6H thread tolerances and more. The ISO 898 - Mechanical Properties of Fasteners Package includes:
ISO 898-1:2013
ISO 898-2:2012
ISO 898-5:2012
ISO 898-7:1992


BS EN 50411-2 Optical Fibre Communication Systems Package

BS EN 50411- 2 Optical Fibre Communication Systems Package (British Standard)

The BS EN 50411 Optical Fibre Communication Systems Package provides the product specifications for fiber organizers and closures used in optical fiber communication systems. The product specifications are applicable to joint closures, protected microduct closures, microduct connectors, sealed pan fiber splice closures, sealed inline fibre splice closures and sealed dome fibre splice closures. This package includes: BS EN 50411-2:2008, BS EN 50411-2-2:2012, BS EN 50411-2-3:2012, BS EN 50411-2-4:2006, BS EN 50411-2-5:2009, BS EN 50411-2-8:2009 and BS EN 50411-2-9:2010.


BS EN 50483 Low Voltage Aerial Bundled Cable Accessories Package

BS EN 50483 Low Voltage Aerial Bundled Cable Accessories Package (Test Requirements) (British Standard)

The BS EN 50483 Low Voltage Aerial Bundled Cable Accessories Package provides the requirements for testing various accessories in connection with low voltage aerial bundled cables. The testing requirements are applicable to general testing of accessories, tension and suspension clamps for neutral messenger systems and self supporting systems, connectors and electrical ageing. This package also provides standard for environmental testing in association with low voltage aerial bundled cable accessories. The BS EN 50483 Low Voltage Aerial Bundled Cable Accessories Package includes: BS EN 50483-1:2009, BS EN 50483-2:2009, BS EN 50483-3:2009, BS EN 50483-4:2009, BS EN 50483-5:2009 and BS EN 50483-6:2009.   


ATIS-0600015. Telecommunications Energy Efficiency Ratio Package

ATIS-0600015. Telecommunications Energy Efficiency Ratio Package

This package includes American National Standards which define energy efficiency metrics, measurement techniques and new technologies as well as operational practices for telecommunications components, systems and facilities. Additionally, these standards which introduce the Telecommunications Energy Efficiency Ratio (TEER), provide a comprehensive methodology for measuring and reporting energy consumption, and uniformly quantify a network component's ratio of "work performed" to energy consumed.


ASME B31.1 / B31.3 Power and Process Piping Package

ASME B31.1 / B31.3 Power and Process Piping Package

The ASME B31.1 / B31.3 Power and Process Piping Package prescribes the requirements for components, design, fabrication, assembly, erection, examination, inspection and testing of process and power piping. It includes ASME B31.1-2016 and ASME B31.3-2016.


ANSI Logo

As the voice of the U.S. standards and conformity assessment system, the American National Standards Institute (ANSI) empowers its members and constituents to strengthen the U.S. marketplace position in the global economy while helping to assure the safety and health of consumers and the protection of the environment.

CUSTOMER SERVICE
NEW YORK OFFICE
ANSI HEADQUARTERS